newbie jet plumbing help

Discussion in 'Jet Drives' started by v8blast, Jan 7, 2011.

  1. v8blast
    Joined: Jan 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: livermore ca

    v8blast New Member

    i have a 1974 jet 455 olds and i hooked a water hose up to the connector and had water on for a few mins before starting the motor ran it for about 1 min then shut it off then i noticed water dripping out from exhaust log between eng and exhaust pulled no 1 spark plug full of water also tiny bit of water in oil :confused:
     
  2. jim lee
    Joined: Feb 2007
    Posts: 368
    Likes: 20, Points: 18, Legacy Rep: 247
    Location: Anacortes, WA

    jim lee Senior Member

    Ask this same question here : Banderlog

    Most of the Banderlog people are local to you (Calif valley) and understand your kind of jet/engine setup.

    P.S. Water in oil with the 455 Olds is a VERY common problem! They'll know how to fix it.

    Hope this helps.

    -jim lee
     
  3. v8blast
    Joined: Jan 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: livermore ca

    v8blast New Member

    :) thank u
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.