High Volume dc reversing ballast pump

Discussion in 'OnBoard Electronics & Controls' started by Johns1152, Sep 21, 2010.

  1. Johns1152
    Joined: Aug 2010
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Illinois

    Johns1152 New Member

    We are looking for a high volume (25gpm) reversing, DC ballast pump to be used in our Multi-hull. I have not been able to find one as yet. If need be we might be able to work with a hydraulic run pump. Must be salt water duty, does not need to draw to a head and not much of pump head (6ft) dry running would be a plus but not required. Any suggestions.
     
  2. CDK
    Joined: Aug 2007
    Posts: 3,324
    Likes: 148, Points: 63, Legacy Rep: 1819
    Location: Adriatic sea

    CDK retired engineer

    Only pumps with neoprene impellers, like PAR and Johnson, can work in both directions, although switching direction is a large burden for the impeller, especially if no fluid is present.

    It is better to use two non-contact water pumps with non-return valves.
     
  3. Johns1152
    Joined: Aug 2010
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Illinois

    Johns1152 New Member

    Thank you that was my assumption, I thought I'd try the fourm to see if there was something out there that I had not run across. These pumps will be in a very harsh environment anyway (oil skimmer vessel) so it will be better to plumb them individually. Thank you again for you contribution.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.