PU coated nylon - glueing!

Discussion in 'Materials' started by wofforduk, May 4, 2010.

  1. wofforduk
    Joined: Mar 2010
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Worcestershire (UK)

    wofforduk New Member

    Hi all
    I was wondering what the best glue would be for a seam for this material, it is a prototype life-raft i am making for university, so the seems are 'virgin' if you like! I have heard of gorilla glue, 3m 5000, and usual 2 pack glue but what will be flexible enough? My design is very much alike a lifejackets construction. thankyou!
     
  2. mark775

    mark775 Guest

    I do know that neither Gorilla Glue nor 5200 are suitable...somebody will come back with the right answer...Good luck
     
  3. wofforduk
    Joined: Mar 2010
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Worcestershire (UK)

    wofforduk New Member

    Thanks Mark ill keep looking! :)
     

  4. Herman
    Joined: Oct 2004
    Posts: 1,618
    Likes: 94, Points: 48, Legacy Rep: 1240
    Location: The Netherlands

    Herman Senior Member

    Does the manufacturer of the material know something?

    PU coated material could be caulked together with an MS polymer or (2K) PU glue. There are very flexible ones available.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.