Fiberglass Tape Issue

Discussion in 'Wooden Boat Building and Restoration' started by WesS, Feb 26, 2010.

  1. WesS
    Joined: Jan 2010
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Tennessee

    WesS Junior Member

    Hey guys- I just finished putting my first coat of paint on my boat and where the fiberglass tape ends I can see it through the paint. All joints were taped on the outside and the whole boat covered in cloth. I sanded down the tape edges and after the cloth applied 4 coats of West Systems 105. Sanded, washed of the blush. Did everything I thought I was to do. I probably didn't need the outside tape, but its a hunting boat and will be rammed into trees, breaking ice, and other things at 3 AM. Now, my final coat will be flat and camo because its a hunting boat. However, I am kinda POed about the seams. Any advice?

    PS- I used Kevlar tape and cloth on the bottom as well. It is truly a pain in the butt, but it is the bottom so it really doesn't matter.
     
  2. Hunter25
    Joined: Mar 2006
    Posts: 174
    Likes: 5, Points: 0, Legacy Rep: 46
    Location: Orlando

    Hunter25 Senior Member

    You did not fair the boat?
     
  3. WesS
    Joined: Jan 2010
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Tennessee

    WesS Junior Member

    Dont you only fair the bottom? I was talking about the sides and inside of the boat. I didnt know you need to fair the whole thing. Do I need to strip off all the paint first, etc?
     
  4. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    You have to fair any part that you want to look smooth. Irregularities such as tape edges can easily transfer through multiple layers of cloth and resin to be visible at the surface.

    There is no functional problem with the edges of the tape being visible in this way. It's purely an aesthetic issue, and even then only visible on close inspection. From six feet away, nobody will see it- and being a hunting boat, it'll get dragged around and scratched up as part of its job.

    I wouldn't worry about it.... especially since fixing it involves stripping all the paint off, fairing and sanding, then repainting. I skipped this level of fairing completely when building my runabout... in eight years, not one person has noticed the tape seams.
     
  5. TollyWally
    Joined: Mar 2005
    Posts: 774
    Likes: 26, Points: 0, Legacy Rep: 423
    Location: Fox Island

    TollyWally Senior Member

    Flat Camo paint is your friend. Unless you want to blow the better part of a day going backwards, which is ok if it really bugs you, carry on and shoot some ducks. sounds like you are making good progress regardless if you bring her to boat show standards or not. :)
     
  6. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    Any hard edge will reject (especially glossy) paint until more coats are added, due to something like surface tension. Fairing eliminates this, coupled with enough coats of neat epoxy to completely seal the surface. If you did all this, rest assured by the time the camo is added, the problem will be solved.
     

  7. WesS
    Joined: Jan 2010
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Tennessee

    WesS Junior Member

    Thanks everyone.
     
Loading...
Similar Threads
  1. djusko
    Replies:
    5
    Views:
    4,278
  2. NorthLakeFisher
    Replies:
    14
    Views:
    1,975
  3. bobbrown
    Replies:
    4
    Views:
    1,583
  4. rangebowdrie
    Replies:
    21
    Views:
    4,414
  5. AAnderson
    Replies:
    5
    Views:
    2,204
  6. Stavbergen
    Replies:
    15
    Views:
    3,852
  7. 300wm
    Replies:
    17
    Views:
    14,861
  8. ned L
    Replies:
    10
    Views:
    3,031
  9. louischallies
    Replies:
    24
    Views:
    10,477
  10. Gabe Neal
    Replies:
    4
    Views:
    4,102
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.