what is with these boat plans?

Discussion in 'Boat Design' started by Steve32, Feb 4, 2010.

  1. Steve32
    Joined: Feb 2010
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: canada

    Steve32 Junior Member

  2. Joe Petrich
    Joined: Jun 2008
    Posts: 165
    Likes: 10, Points: 18, Legacy Rep: 141
    Location: PNW

    Joe Petrich Designer

    Check out Specmar or Munson.
     
  3. Steve32
    Joined: Feb 2010
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: canada

    Steve32 Junior Member

    thx! I'll check that out
     
  4. kmorin
    Joined: Apr 2005
    Posts: 185
    Likes: 18, Points: 0, Legacy Rep: 231
    Location: Alaska

    kmorin Senior Member

    designs of metal boats

    Steve32
    The link you showed is to a manufacturer's site, I'd expect those boats to be very cost influenced so the designs are simplified and most of the deck boats were landing craft- not the most shapely work boats afloat.

    I admit this particular firm's boats are little bit 'agricultural' or industrial and not a shapely as the beautiful AMF boats from Down Under. But these boats somewhat simplified lines look to me they're intended to be less expensive than a custom designed one-off boat where more elegant lines and forms are the expected.

    Once a [plastic] mold is made the curvy shaped hulls come out in plastic- over and over at a relatively low cost. However, in welded metal most curves are expensive compared to those shapes in molded plastic and the cost is in each boat. So I think the link(s) are to a manufacturer(s) who're trying to keep shapes simple to keep costs low?

    I'd tend to separate the one-off welded metal boat from the production boat builders' designs -especially in regards a design's impact on cost justified construction details.

    There aren't many welded aluminum Riva's because the labor to build that shape in welded metal would put the cost too high for the production builder to sell. I think that is why we see so many simplified forms in the market.

    Cheers,
     
  5. Steve32
    Joined: Feb 2010
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: canada

    Steve32 Junior Member

    this is true... and AMF does make a wonderful product, I look at those QRV everyday and if I could find plans for a 20' hull in that style I would be all over it.
     

  6. Rampager
    Joined: Mar 2004
    Posts: 24
    Likes: 1, Points: 0, Legacy Rep: 33
    Location: Canada

    Rampager Junior Member

    as its been previously mentioned I think you are going to find the limitation isnt in the design but the material you are dealing with. Certainly with more time and care more attractive alloy boats can be built but the fact still remains constructing alot of curves and contours into an alloy boat is extremely difficult to execute well. Folding/bending alloy sheets offers free strength while welding actually weakens it. Even on a build where you are doing the labour yourself(i.e you're willing to invest the extra time) you will find it a huge challenge to avoid wrinkles, waves and panel warpage while making alot of welded seams vs bends. These limiitations tend to render it impractical for production situations.

    Even with that limitation inherent to the material I feel most manufacturers do a horrible job trying to at least minimize it. Just because a boat is alloy doesnt mean it shouldnt look like a shoe box...
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.