G'day from Australia / Kauri sea worm

Discussion in 'Wooden Boat Building and Restoration' started by Crayboat, Nov 12, 2004.

  1. Crayboat
    Joined: Nov 2004
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Australia

    Crayboat New Member

    Hi I am new to these forums.

    I am currently restoring a 36' NZ Kauri timber crayboat and was interested to know if anyone knows why NZ Kauri is so good at resisting marine worm infestation.

    Cheers.
     
  2. riggertroy
    Joined: Jul 2004
    Posts: 104
    Likes: 9, Points: 0, Legacy Rep: 85
    Location: New Zealand

    riggertroy Senior Member

    I have removed a few metres of worm eaten kauri from a yacht I'm restoring.
    Teredo in three planks, and gribble in sections down aft where not much light reaches. The teredo was in planks that had rested on mud when the tide was out, and the gribble where there was damage.
    I was suprised with how little worm there was as the vessel had been pretty much abandoned for years.

    Another NZ timber that is known for resisting worm is Totara, the Soren Larsen was sheathed in it a few years back.
     
  3. Crayboat
    Joined: Nov 2004
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Australia

    Crayboat New Member

    Hi Troy,

    Thanks for your response... very interesting.

    My vessel was built in 1968 out of 1.5" thick NZ Kauri planking. The complet hull has been taken back to bare timber.
    During it's life it had periods of not being slipped for up to 3 years and yet the planking is unmarked like the day it was built.

    Best of luck with your vessel and may all your winds be fair.
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.