Hull design for Wellcraft Nova - Nova II - Nova ST - Nova Spyder

Discussion in 'Powerboats' started by Tim.M, Apr 17, 2009.

  1. Tim.M
    Joined: Apr 2009
    Posts: 48
    Likes: 1, Points: 0, Legacy Rep: 37
    Location: Wisconsin

    Tim.M Junior Member

    Does anyone know the history / changes of the actual hull design Wellcraft built between the 1970s Nova, the 80s Nova II, the later Nova Spyder, and the 90s Nova ST? Did the same person design these all?
     
  2. Jeff
    Joined: Jun 2001
    Posts: 1,368
    Likes: 71, Points: 58, Legacy Rep: 923
    Location: Great Lakes

    Jeff Moderator

    As I understand it, the original Nova was designed before Wellcraft bought the Nova boat company. Distinctive features include the center section (most) of the transom extending a few inches further aft, leaving a small ~9" inset section on both port and starboard, but a nice stiff transom.

    See pictures in this thread http://www.boatdesign.net/forums/st...8-starts-but-will-not-stay-running-27366.html

    The original Nova has a good deal of flare on the bow and was a nice dry boat. I think the original was built through 1978 or 1979. With twin 302s I belive it would see around 40 knots, with 350s or 351s it ran 50 to 55 knots. I spent many hours running a 1976 250 Nova in the 1990s. A bit long to plane with the bow high, and definitely has a strong 70's look, but it ran nice and dry and sliced easily through moderate waves.
     

    Attached Files:

  3. Jeff
    Joined: Jun 2001
    Posts: 1,368
    Likes: 71, Points: 58, Legacy Rep: 923
    Location: Great Lakes

    Jeff Moderator

    Sorry there wasn't an answer posted yet -- but thanks to this thread I did some looking around which brought back a lot of good memories. I happened to come upon a deal that was too good to pass up from a nice guy who had upgraded to a 30' and now had one too many boats, so I picked up a 1990 Wellcraft 26' Nova ST at a real steal. I can't remember in detail what the Nova II and Spider (basically the same as the II but with a lower windscreen) hull was like. But in the late 80's with the Nova III they added a relatively simple single step.

    Then starting in 1990 the ST has one step, strakes that end at the step, and a center flat pad aft of the step.

    The step is pretty simple, but I really like the newer configuration as it comes up on plane very smooth and easy as if it doesn't weight a thing compared to the older 250 I remember. I got an ST with a pair of small blocks - I believe most of the ST though were sold with twin 454s but the space is so tight I can't imagine where you'd have an inch of space to work on the big blocks.
     
  4. vrod02
    Joined: Jun 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: St. louis Mo.

    vrod02 New Member

    The nova hull pictured above was a Richard Cole design, a Donzi 7 Meter till 1970 . Then a Nova marine "sprint"70-71 ,Allen brownie brown, designed the cap. Wellcraft bought the molds in 71 or 72.
    More info and pics at www.nmxtreme.com

    Some pics.

    Mine 1970 Donzi.
    [​IMG]

    Nova Marine. 1971
    [​IMG]
     
    Last edited: Jun 16, 2009
  5. novaowner
    Joined: Jul 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Georgia

    novaowner Junior Member

    The 24'-10" Nova was originally designed by Nova Marine owned by Allan "Brownie" Brown and Bill Wishnick which was sold to Wellcraft in 1971. It was originally designed for twin vee drives.
     
  6. novaowner
    Joined: Jul 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Georgia

    novaowner Junior Member

  7. novaowner
    Joined: Jul 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Georgia

    novaowner Junior Member

    Here is a site that you must bookmark if you're into the old Novas
    http://supernova19.com/nova_marine_at_supernova19_com.htm

    Take a look at the great original ads and photos at http://supernova19.com/nova_marine_at_supernova19_com.htm
     
  8. novaowner
    Joined: Jul 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Georgia

    novaowner Junior Member

    Nice site too vrod!
     
  9. holorinhal
    Joined: May 2009
    Posts: 25
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: las vegas

    holorinhal Junior Member

    '73 Nova 25

    I have a 73 nova. My question is how can You tell the diffrence from a wellcraft Nova and a Nova marine.
    My registration is listed as nova marine 24'-8", but the dash pannel has a wellcraft emblem engraved on it. The HIN is N325165, but comes up with no info. I think there are some letters ofr numbers missing.
    Any way here are a couple of pics.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    This pic I have removed the bow rails. i think it looks much better without them.

    [​IMG]
     

    Attached Files:

    • 001.JPG
      001.JPG
      File size:
      322 KB
      Views:
      31,101
    • 004.JPG
      004.JPG
      File size:
      315.8 KB
      Views:
      26,905
    • 005.JPG
      005.JPG
      File size:
      308.7 KB
      Views:
      17,065
    • 008.JPG
      008.JPG
      File size:
      326.3 KB
      Views:
      21,675
    • 003.JPG
      003.JPG
      File size:
      68.3 KB
      Views:
      17,577
  10. vrod02
    Joined: Jun 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: St. louis Mo.

    vrod02 New Member

    Nice Boat!! Dont know if you found www.nmxtreme.com or www.chinewalking.com yet. Its a Wellcraft Nova. Window's and alpha's are a giveaway. The hulls are the same on the outside but constructed differently. Wellcraft is a heavier hull. Love to see some pics of the interior.
     
  11. holorinhal
    Joined: May 2009
    Posts: 25
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: las vegas

    holorinhal Junior Member

    I just inherited the Nova. It needs alot of work on the interior.
    Some one from Offshore only suggested that it might be a "Brownie" Nova due to the fact that there are stringers under the engines instead of a bildge liner.
    Any way here are some interior shots.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

    Attached Files:

  12. holorinhal
    Joined: May 2009
    Posts: 25
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: las vegas

    holorinhal Junior Member

    A couple of the engines and drives.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

    Attached Files:

  13. vrod02
    Joined: Jun 2009
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: St. louis Mo.

    vrod02 New Member

    Great boat but its a wellcraft. insig. on the dash. If in doubt on the inside cuddy port side should have #'s if its a nova marine.Feel free to post on one of the sites I gave you. The Nova guru's other than me have not seen this yet.I post this thread!
     
  14. Jeff
    Joined: Jun 2001
    Posts: 1,368
    Likes: 71, Points: 58, Legacy Rep: 923
    Location: Great Lakes

    Jeff Moderator

    Like the look of your boat. On my 250 I took the bow rail down to the level of the windshield so the rail followed the line where the fiberglass/glass meet there. That also looked good to my eye while still giving a sense of security on the bow (and helped with my bow-envy as it made the bow seem just a bit larger to my eye in proportion to the rest of the boat than without any rail at all.) But it looks good both ways.
     

  15. holorinhal
    Joined: May 2009
    Posts: 25
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: las vegas

    holorinhal Junior Member

    Well I sent a p.m. to Brownie (Allen Brown, the designer,owner and builder of Nova Marine)over on Offshore Only. He said that Mine is a Wellcraft, due to the fact that Mine is a '73 and He sold Nova Marine in 1971.
    Jeff, Do You have any pic's of Your Nova. I love to see Pics of other Novas....Hal
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.