Need some advice on welding aluminum.

Discussion in 'Metal Boat Building' started by bntii, Sep 9, 2008.

  1. bntii
    Joined: Jun 2006
    Posts: 731
    Likes: 97, Points: 28, Legacy Rep: 1324
    Location: MD

    bntii Senior Member

    I have gotten up to speed tig welding stainless and have a Miller Maxstar 150 STH. I am going to build a boom and am wishing I had purchased one of the ac/dc machines to have the al capacity.
    The question-

    What are the chances I can decent results stick welding aluminum?

    Thanks all
     
  2. tazmann
    Joined: Aug 2005
    Posts: 329
    Likes: 17, Points: 18, Legacy Rep: 215
    Location: California

    tazmann Senior Member

    I have welded aluminum with stick in the past worked ok for welding flat but out of position gets a bit tricky. I would say get a few sticks and play with it on some scrap.
    Tom
     
  3. Wynand N
    Joined: Oct 2004
    Posts: 1,260
    Likes: 148, Points: 73, Legacy Rep: 1806
    Location: South Africa

    Wynand N Retired Steelboatbuilder

    for starters, remove the oxidizing skin/layer from the alu before welding...
     
  4. kmorin
    Joined: Apr 2005
    Posts: 185
    Likes: 18, Points: 0, Legacy Rep: 231
    Location: Alaska

    kmorin Senior Member

    Stick on Aluminum

    bntii,

    There are some aluminum flux coated electrodes in the market and they can make 'serviceable' welds, but they're not the type of cosmetically clean and full strength welds usually associated with a boom.

    I'd suggest you find someone to use a TIG torch on the welds both for appearance and strength. AC TIG is the only real way to do the work you've described, other methods can be used but the welds will be second best -at best.

    cheers,
    kmorin
     
  5. LyndonJ
    Joined: May 2008
    Posts: 295
    Likes: 20, Points: 0, Legacy Rep: 233
    Location: Australia

    LyndonJ Senior Member

    Would it be a possibility to use a stick with an onboard inerter for a handyman not a pro alloy welder to repair their own boat in an emergency patchup ?

    Seems one of the pitfalls of alloy is doing repairs of fatigue cracks broken bits holed hulls etc in remote areas. I never heard of the stick welding..

    What sized buzzbox-inverter (current/voltage) would be required?
     

  6. gomoto69
    Joined: Jul 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: kelowna bc

    gomoto69 New Member

    apparently, you could tig it on dc, if you use helium for gas.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.