Flopping on one side at speed

Discussion in 'Stability' started by bifflefan, Jun 19, 2009.

  1. ondarvr
    Joined: Dec 2005
    Posts: 2,929
    Likes: 573, Points: 113, Legacy Rep: 506
    Location: Monroe WA

    ondarvr Senior Member

    This is one of the issues people using Whale tail type products report when its not set up correctly, It has to do with the foil dragging in the water at speed. Normally when you take the foil off the problem goes away, this isn't the only cause by any means, but it is the easiest and cheapest to try as a first step.
     
  2. rivadezza
    Joined: Sep 2008
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: -8
    Location: Thailand

    rivadezza Junior Member

    Mybe make a flat surface in the back of hull bottom??
     
  3. messabout
    Joined: Jan 2006
    Posts: 3,367
    Likes: 510, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    The problem is fundamental. Too much motor on too small a boat. A 16 foot boat of that type needs no more than 20 to 25 hp. Unless it is heavily loaded, it will run at a very respectable speed and be safer to operate than with an absurdly large and foolishly heavy engine. More than that, the economy of operation is a major factor. You said " a boat for the kids to play with" . You have given them a lethal toy. Trade the damned engine for a more sensible one.
     
  4. pistnbroke
    Joined: Jan 2009
    Posts: 1,405
    Likes: 34, Points: 48, Legacy Rep: 404
    Location: Noosa.Australia where god kissed the earth.

    pistnbroke I try

    Rubbish Messahbout ....I have a 16 ft runabout with 90 hp ..it runs to about 37 knots but you cruise nice at about 25 with the trottle back...others fit 150 HP to this boat...I still dont see how it can fall over if the back 1/3 is in the water on the plane...does it flip violently and quickly side to side as you steer like a jetski..? ( yes I know boats lean in the turn but they sit up straight when not turning)

    No boat is for the kids to play with ...you need a lisence here for over 6 hp and be 16 ...
     

    Attached Files:


  5. Frosty

    Frosty Previous Member

    I had a 18 footer with a label on the transom saying 80HP max.

    I put a 175 Merc on it. When I sold it he put a 200Hp on it.

    It was a great bare foot boat, behaved perfectly but was'nt a kids boat.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.