Renault Marine Couach RC28d AS16 Reverse gear problems

Discussion in 'Inboards' started by OllieBridges, May 8, 2009.

  1. OllieBridges
    Joined: Feb 2009
    Posts: 9
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: uk

    OllieBridges Junior Member

    Hello.
    I wondered if anybody here could help me. I have a Renault Marine Couach RC28d with a (renault) AS16 reverse gear gearbox. My problem is that the clutch cones inside the gearbox are slipping - it sometimes takes a few attempts to get any forward motion. When I do get forward motion it is often a bit on the intermittent side. I wondered if anybody had either a: a spare as16 gearbox; b: cone clutches for the gearbox or c; are there any compatable cone clutches from other manufacturers for this box? d; all else failing, are thre any other gearboxes that would fit - the ratio is 2.05 to 1.
    RC28d parts are a little hard to find!!!
    I have spent ages playing around with the selector lever adjustment with mixed results. Any help or pointers would be gratefully recieved.
    I'm in England.
    Many thanks, ollie
     
  2. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I am not familiar with that gearbox but have rebuilt many cone clutches. They are supposed to self adjust for wear. However, if they are galled or worn unevenly, they may not get enough friction. Sometimes it is possible to lap them and make them seat right again.
     
  3. OllieBridges
    Joined: Feb 2009
    Posts: 9
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: uk

    OllieBridges Junior Member

    Hi Gonzo. Hope you are well. Many thanks for your reply. My computer has been in for repair so have only just read it!! I think I'm going to have to do what you say. I've been in contact with a couple of engineering companies who may be able to help. I've got to take the 'box to them so that they can have a look.
     
  4. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Hi: If you don't get any results, I will be in London in July. My plan is to stay in the UK for at least a couple of months.
     
  5. apex1

    apex1 Guest

    RENAULT !................................
    MARINE COUACH!.......................


    the average scrap dealer charges you for bringing it in! Regardless of weight.
     

  6. CDK
    Joined: Aug 2007
    Posts: 3,324
    Likes: 148, Points: 63, Legacy Rep: 1819
    Location: Adriatic sea

    CDK retired engineer

    Google for Technodrive, an Italian company, now US owned. They make small gearboxes with 2.0:1 reduction and supply SAE adapters and engine couplers as well. Good value for money!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.