Alluminum V-Hull Power Boat

Discussion in 'Metal Boat Building' started by Bud1000, Aug 21, 2004.

  1. Bud1000

    Bud1000 Guest

    Hello i am looking to find out if there is a company out there or a marine architect that has or is curently designing a fast deep v-hulled power boat out of alluminum , i am looking for a mono hull design to incorporate diesel power plant coupleled with an arnusen surface drive in a fast deep v configuration complete with steps in the 24 to 26 ft range. I have a few other ideas in mind to be incorporated into this hull and any information or help someone could provide me would be greatly appretiated.
    Regards Marc
     
  2. hoagey
    Joined: Dec 2003
    Posts: 14
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Washington

    hoagey Junior Member

    Check out Specialty Marine Contractors out Of Scappose, Oregon.
    I am not affiliated in any way.
     
  3. bud1000

    bud1000 Guest

    thanks for your reply hoagey...... ive put a couple other posts in a few other forums seems that my quest is very unusual...... do you know if spetialty marine contractors ..... has a web site? i am more looking for plans for my own construction purpose but it needs to be engineered my a marine architect and designer...... to get a functioning hull that will preform to my expectations first time
     
  4. hoagey
    Joined: Dec 2003
    Posts: 14
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Washington

    hoagey Junior Member

    www.specmar.com or search 'specialty marine contractors'.
    They also design in aluminum. Also check out the 'Metal Boat Society'.
    Good luck and keep us posted.
    Hoagey
     
    Last edited: Aug 29, 2004
  5. bud1000

    bud1000 Guest

    thanks for your help Hoagy..... checked out specmar and got a response form them they are far to busy at the moment and the chap gave me a couple other contact numbers to check out
    metal boat society wasnt much help im afraid
    regards Marc
     
  6. RichWiggins
    Joined: Mar 2005
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Detroit

    RichWiggins New Member

    Deep V aluminum

    Hi,

    I'm planning on having Svendsen Boats of Wrangell Alaska build something similar for me. Would you mind sharing your ideas? I'm trying to build a 26 center console for fishing that has an offshore style hull. They're used to building commercial fishing boats and I'd like to give them some ideas as to how to make mine a bit more sporty. Since they make commerical boats, I'm sure they'll make it strong enough...I just need to give them some direction as to the design.

    My email is Rich@ims1968.com
     

  7. AlaskaFisherman
    Joined: Dec 2004
    Posts: 76
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Kenai, Alaska

    AlaskaFisherman Junior Member

    ATec Marine out of Kenai Alaska

    They build lots of sport boats of all sizes. 907-283-2628
    I'm not a part of their business.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.