Design Suggestions

CET · Nov 29, 2008

Loveofsea said: ↑

Here are a few things that make this hull work so well. The hull is flat all the way to the bow. The widest part of the hull is 2/3 forward, and 8" wider than the transom. i carry 54 gallons of fuel in the fwd 1/3 of the hull (in portable tanks that nest under the deck) I use a SST lifting strake across the transom with a cutout for the engine to create exagerated transom lift..

__in other words, most of the weigh is pushed max forward. The impact point of the hull is 2/3 fwd where the hull is the widest..

two opposing factors come into play here--the inherent bow lift from pushing a wider fwd hull over the water and the exagerated trasom lift from the SST lifting strake across the transom. The hull creates lift both fore and aft---that has the effecy of keeping the hull stuck to the surface. if it doesn't lift, it will not slap back down. The impact point (the widest point) uses the extra weight of the fuel along with the exagerated transom lift to crush the water and send it out the sides.

Here is a link to a stroy that was done about the 'Good Skiff' last year...

http://www.oceanskiffjournal.com/
Click to expand...

Interesting ideas. A 19' flat-bottom dory ought to run quite well with a 25 - 40 hp motor. I have a hunch yours requires a good deal more than that.

ancient kayaker · Nov 29, 2008

TeddyDiver said: ↑

... but also for ugly gents talking dirty ...
Click to expand...

That explains the many, large shaded volumes, clearly for beer storage.

messman · Nov 29, 2008

ancient kayaker said: ↑

That explains the many, large shaded volumes, clearly for beer storage.
Click to expand...

LOL..I think that was to be a secret, so the Better Half dont find out. Hope she dont read the forums.

Teddy,

I cant wait to see it completed and to hear your review of it once you splash it.

Chris

ancient kayaker · Nov 30, 2008

Me too.

p.s., I can keep a secret. Tell me more of them.

Log in or Sign up

Design Suggestions

CET Senior Member

ancient kayaker aka Terry Haines

messman Junior Member

ancient kayaker aka Terry Haines

Suggestions on this design

I would like suggestions for design books

Naval Architect suggestions, for custom design.

[Canoe Design] suggestions for canoe design.

Suggestions for a 16' daysailor design

Boat design for sale or investor needed to start production

Curved foil design

Sportive fishing boat design for uni project, cuddy cabin

Not a Design but a Use Case change: Prop changes as needed?

Crowther Shockwave Design