Portable Boat Company

Discussion in 'Services & Employment' started by MHEnterprises, Jul 27, 2007.

  1. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    We are a group of long time boat manufacturing personel that have combined forces to offer a relatively complete set of personel to do just about anything you would need in a small boat building company. We cater to the smaller company that has the needs of the "Big Boys" but does not have the resources to have a full time staff of all departments. We fill the need of the temporary requirment for a specfic situation. We are open to traveling anywhere the job may be.
    If you have a need for highly experiened fiberglass laminators,finishers,ect We have a group of laminators that have been trained in large part "Vacuumn Infusion" by the Diab factory personel and do this regularly for some of the larger sport fish builders in Florida. Please visit my web site www.mhenterprisesllc.com You will see the services I have available to the marine industry. We are doing production boat building for some smaller companies at this time and just completed a project for a major mold manufacturer. As you will read I am able to offer personel that can fill just about any need you may have. If you need help not shown please call or e-mail me with your requirments.
    Thanks for your time and we look forward to working with you.
    Jim Martin
     
  2. timgoz
    Joined: Jul 2006
    Posts: 1,079
    Likes: 32, Points: 48, Legacy Rep: 277
    Location: SW PA USA

    timgoz Senior Member

    Hi Jim,

    Your website link is not working, for me at least.

    Take care.

    Tim
     
  3. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    web site repair

    Thanks,
    Got it fixed I believe.
    Jim Martin
     
  4. timgoz
    Joined: Jul 2006
    Posts: 1,079
    Likes: 32, Points: 48, Legacy Rep: 277
    Location: SW PA USA

    timgoz Senior Member

    Yes, it is working now.
     
  5. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    PLease visit the following link to Soundings Trade Only article on my company. The article starts on page 14. We will travel anywhere so if you are in need of short term help, please call
    Thanks,
    Jim martin
    www.tradeonly-digital.com/tradeonly/200709/
     
  6. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    Please visit our site to see some additions we have made
     
  7. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    New Addition

    Visit our website to see pictures of our new fiberglass fabrication building. We have aquired a 52,000 sf building and have plenty of capacity for new projects. Building is located in Bradenton, Fl.
    http://www.mhenterprisesllc.com
     
  8. Kay9
    Joined: Oct 2006
    Posts: 589
    Likes: 26, Points: 0, Legacy Rep: 279
    Location: Central Coast Oregon US.

    Kay9 1600T Master

    How is a 52000 SF building portable???????
     
  9. Ike
    Joined: Apr 2006
    Posts: 2,677
    Likes: 478, Points: 83, Legacy Rep: 1669
    Location: Washington

    Ike Senior Member

    Interesting concept. I hope it works out.
     
  10. the1much
    Joined: Jul 2007
    Posts: 3,897
    Likes: 44, Points: 0, Legacy Rep: 696
    Location: maine

    the1much hippie dreams

    LLC on the end of any company is scary.
    i cant figure out if its a "him"(I) or a "them"(WE) hehe :D
    just wanted to say the "concept" works,,, i started mine out of the trunk of my car,, and within a year was backlogged for 2 years.
     
  11. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member


  12. MHEnterprises
    Joined: Mar 2007
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: florida

    MHEnterprises Junior Member

    We are proud to announce we have added an Upholstery shop to our line with specialized services in:
    * OEM Production Upholstery
    * R & D / Prototyping
    * Custom Upholstery
    please visit http://mhenterprisesllc.com to view some pictures of our past work
    If you have any questions please e-mail me at jimmartin@mhenterprisesllc.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.