15 m (50') semiplanning boats

Discussion in 'Boat Design' started by Guillermo, Dec 30, 2007.

  1. Guillermo
    Joined: Mar 2005
    Posts: 3,644
    Likes: 189, Points: 63, Legacy Rep: 2247
    Location: Pontevedra, Spain

    Guillermo Ingeniero Naval

    Not around here, nor billfishing. Thanks for the contribution.

    Cheers.
     
  2. CigaretteDesign
    Joined: Jan 2008
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Long Island, NY

    CigaretteDesign Junior Member

    What type of a boat, cruiser, yacht, go-fast?
     
  3. yipster
    Joined: Oct 2002
    Posts: 3,486
    Likes: 97, Points: 58, Legacy Rep: 1148
    Location: netherlands

    yipster designer

  4. charmc
    Joined: Jan 2007
    Posts: 2,391
    Likes: 78, Points: 0, Legacy Rep: 840
    Location: FL, USA

    charmc Senior Member

    Guillermo,

    There were some excellent designs built in the US from the 1930's through the 1950's, cruisers and sport fishermen. Many had the performance you mentioned, trolling for hours at 5-7 knots, and able to get home at 15 -17 knots if needed. The ones in my personal experience usually had a narrow beam, deep vee entry transitioning to a nearly flat bottom aft, with rounded chines and a skeg. Very good sea keeping, able to maintain planing speeds in seas over 3 m without pounding (more than once, my passengers would fall asleep while we were travelling in steep swells at 15 knots). A deep keel and skeg helped tracking in following and quartering seas. Perfect? No, very tender; rolling at anchor in even moderate chop, and very wet while slicing through those steep swells. The lines of those classics might make a good beginning for a modern iteration of the offshore power cruiser/fisherman.
     

    Attached Files:

  5. charmc
    Joined: Jan 2007
    Posts: 2,391
    Likes: 78, Points: 0, Legacy Rep: 840
    Location: FL, USA

    charmc Senior Member

    A few more pictures.
     

    Attached Files:

  6. fcfc
    Joined: Feb 2005
    Posts: 781
    Likes: 29, Points: 28, Legacy Rep: 399
    Location: france,europe

    fcfc Senior Member

    Here is the 19m N Irens : http://www.tuco.dk/default.asp?mn1=5&mn2=6&mn3=63&sid=80

    Perhaps a bit above your length. An I do not exactly understand how it is built. I fact, I do not understand how at all ...


    It is difficult to find styling for a rather fast and low power boat by looking fishing boats. Fisherman are more on the heavy slow boats, except recent (say 1960 and newer ...) outboard powered hulls. Olders boats were built carved wood. This material does not lead to designs compatible with your goals.
    Older typical french brittany fishing boats were displacing from 35 to 70 tons for length 15m 18m. Even open boats around 9m-10m were in the 8-10 tons range, and I fear most other countries fishermen had the same weight constraints from building methods and bilge size.
     
  7. Guillermo
    Joined: Mar 2005
    Posts: 3,644
    Likes: 189, Points: 63, Legacy Rep: 2247
    Location: Pontevedra, Spain

    Guillermo Ingeniero Naval

    Thanks a lot, fcfc and Charlie.
     

  8. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.