Engine stalls when at idle when hot

Discussion in 'Gas Engines' started by partgypsy, Nov 28, 2007.

  1. partgypsy
    Joined: Jan 2007
    Posts: 29
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: 20744

    partgypsy Junior Member

    I have a 1977 Chris w/2 350ci inboards with Carter AVS 4bbl carbs. One of the engines is hard to start and when it warms up, it stalls when near idle. It won;t start until cool. Makes for interesting docking.
    It's getting gas into the carb.
     
  2. Fanie
    Joined: Oct 2007
    Posts: 4,604
    Likes: 177, Points: 63, Legacy Rep: 2484
    Location: Colonial "Sick Africa"

    Fanie Fanie

    If it was a Yamaha I could tell you outright it's the electronic ignition playing up. The Yamaha I had to crank untill hot before it starts. If you let it cool down you have to heat it up again. So if you're towing the boat somewhere you have to stop every 5km and run the motor in a bucket to keep temperature up.
    Makes for interesting fishing. Makes for interesting getting anywhere.
    Check that you have spark. Spark + gas = running motor.
     
  3. Kay9
    Joined: Oct 2006
    Posts: 589
    Likes: 26, Points: 0, Legacy Rep: 279
    Location: Central Coast Oregon US.

    Kay9 1600T Master

    On an older engine such as this I would guess it is vapor lock, since it is happening once the engine gets warm, and then works again once the engine is cool. Generally a rebuild of the carb will solve this problem.
     
  4. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    fanie is on the right path i would guess
    check the coil as it heats up resistance is increased and no spark
    points and condensor i'd check out to
    if the carb is passing fuel after the engine quits it's most likely not fuel related
     
  5. partgypsy
    Joined: Jan 2007
    Posts: 29
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: 20744

    partgypsy Junior Member

    Thanks... one sincere mechanic told me it was because of "tuliping" of the valves and to check the compression. I think I'll start with a tune-up and if necessary, a carb rebuild. May as well do the compression while I'm at it. Cheaper than a new engine.
     

  6. kenJ
    Joined: Jul 2005
    Posts: 349
    Likes: 5, Points: 0, Legacy Rep: 56
    Location: Williamsburg, VA

    kenJ Senior Member

    Car engines are cooled by the air passing through the radiator and around the engine. Most boat engines are stuck in a soundproofed box to reduce noise. Might want to add some ventilation to the engine box.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.