The Contender Hull

Discussion in 'Boat Design' started by matt76, Sep 19, 2007.

  1. matt76
    Joined: Jun 2007
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: st. louis missouri

    matt76 Junior Member

    I'm interested in building an electric powered boat. I really like the size and looks of the Contender sailing dingy.
    Would this hull design work for me?
    i only want her to be a two seater and well powered. Cedar strip and fiberglass construction. i have all kinds of motors i could use, i just need to make sure she can carry the weight.
    any thoughts?
     
  2. Doug Lord

    Doug Lord Guest

    Contender

    I doubt that the Contender would be a good choice since its designed as a singlehander. Small high performance boats don't react well to much more than their designed sailing weight.
    A better choice might be a Thistle hull-designed for three crew and an easily driven hull. It would also be less affected by going over weight 60-80 pounds.
    They are also fairly plentifull at good prices.
     
  3. matt76
    Joined: Jun 2007
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: st. louis missouri

    matt76 Junior Member

  4. matt76
    Joined: Jun 2007
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: st. louis missouri

    matt76 Junior Member

    i would be building the hull myself. i build cedar strip canoes, and want to try something a little bigger.
    is there any modifications i could make that would help to carry the weight?
    she can't be any longer than 16 feet and i would like to stay under 6 foot wide.
     
  5. Doug Lord

    Doug Lord Guest

    An International 14 hull or Windmill/US1 hull(15.5'LOA -4.6' beam) might work better.
    You might look into the Albacore-15' LOA Beam 5'1.5". All very easily driven hulls but for your purpose I'd bet on the Albacore.
     
  6. keith66
    Joined: Sep 2007
    Posts: 346
    Likes: 31, Points: 28, Legacy Rep: 168
    Location: Essex UK

    keith66 Senior Member

    In 1994 i re engined an Electric powered boat, she was based on a small steam launch the lady Elizabeth ? that was in the Steamboat museum on Lake Windamere. A friend of mine redesigned the hull by shortening it to about 18ft and put it into production with no real success.
    The boat performed quite well but displaced about 1 ton, the batteries were very heavy.
    I am not sure a sailing dinghy hull will be suitable unless you go for an electric outboard with light battery.
    I would have thought a good traditional rowing hull would be more suitable and easily driven.
     
  7. messabout
    Joined: Jan 2006
    Posts: 3,367
    Likes: 510, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    Keith66 has the better answer. A traditional rowing hull will do the job nicely. A whitehall type is a good choice and will be right down your alley as it can be strip built quite handily. It will also tolerate large variations in cargo and passenger weight. There is a very nice example of an electric whitehall that plies the Manatee river in Bradenton Fl. A delightful boat she is.

    Check out John Gardners books about traditional small craft. There are several very good prospects in the books, and there are even offset tables that will get you started immediately.
     
  8. matt76
    Joined: Jun 2007
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: st. louis missouri

    matt76 Junior Member

    basically i want to build a smaller, lightweight version of something like a 17 foot Chris Craft Riviera, powered by batteries.
    something i can use on small lakes that don't allow gas motors. i want to be able to move as fast as the hull will allow. i'm not worried about not being able to go far between charges.
    400lbs of batteries, 50lb motor, two grown adults.
    something i can deck.
    thanks for the replys.
     
  9. lewisboats
    Joined: Oct 2002
    Posts: 2,329
    Likes: 129, Points: 0, Legacy Rep: 1603
    Location: Iowa

    lewisboats Obsessed Member

    "I want to move as fast as the hull will allow"

    Does that mean planning or displacement speeds? If you want displacement speeds then a runnabout hull would be wasteful because of the drag from the transom and the overall shape...if you want to plane...I think you'll need more hp than is available from battery/electric motor combo. You will probably want a double ended design that is easily driven (as stated above) because you don't want to draw down your batteries too fast or too far...it ruins them in quick order. However...a classy compromise would be a Bolger Sneakeasy...long, slim and easily driven but with some style to it too.

    I snagged these pics from this site...the first in the list when googled:
    http://www.alaska.net/~fritzf/Boats/Sneakeasy/Sneakeasy.htm

    Steve
     

    Attached Files:

  10. alan white
    Joined: Mar 2007
    Posts: 3,730
    Likes: 123, Points: 0, Legacy Rep: 1404
    Location: maine

    alan white Senior Member

    One boat that comes to mind is a 19 ft Grand laker canoe. Big capacity, square stern, long waterline. One horsepower (.746 kw) would get it up to hull speed (about 5 1/2 kts). Hull weight of 125# as a stripper.

    Alan
     
  11. Steve B
    Joined: Jun 2007
    Posts: 17
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: uk

    Steve B Junior Member

    About putting a motor in an Albacore -
    The hull is very round, so the passengers must sit still not to upset the steering. It was designed to be sailed. Also Uffa Fox would come back and haunt you if you even thought about doing it!
     

  12. matt76
    Joined: Jun 2007
    Posts: 33
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: st. louis missouri

    matt76 Junior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.