Chassis grounding on pontoon.

Discussion in 'OnBoard Electronics & Controls' started by Dirt Cash, Jul 1, 2007.

  1. Dirt Cash
    Joined: Jul 2007
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SC

    Dirt Cash Junior Member

    A friend has a pontoon with a red wire run from the + batt. to the chassis near the motor mount.

    Is there any reason the boat chassis needs a + ground?

    Is there any reason the chassis needs any "ground" connection to the battery, at all?
     
  2. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    first this doesn't sound right
    is the motor pos or neg ground
    what type of boat and motor
    in most cases should not have this pos wire going to the chassis
    if neg ground this red wire is more wrong
    in most cases the chassis is grounded to help prevent electrolysis
     
  3. Dirt Cash
    Joined: Jul 2007
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SC

    Dirt Cash Junior Member

    Yamaha 4stroke 90. I can only assume...

    ...the motor is neg. ground but I guess that's really the heart of the question.

    It's an older toon that's been repowered by a less-than-professional.

    My friend said it was blowing many fuses and her brother disconnected this wire to fix the problem.

    I would think it needed to be neg grounded at the chassis but I wondered about the electrolysis issue.
     
  4. Ike
    Joined: Apr 2006
    Posts: 2,677
    Likes: 478, Points: 83, Legacy Rep: 1669
    Location: Washington

    Ike Senior Member

    It should be negative ground. It was blowing fuses because you had a direct short to ground.
     
  5. Dirt Cash
    Joined: Jul 2007
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SC

    Dirt Cash Junior Member

    Thanks, but not quite so simple...

    ...it went all last season with the pos ground hooked up!

    I figure something (a light, etc.) shorted the neg to chassis and that's whty it started blowing fuses.

    I work in electronics and understand the grounding theory in a car, but my real concern was with a possible link to the electrolysis issue.

    To simplify the important question: "Is a NEW toon neg grounded to the chassis?"

    I think that is the crux of the issue.
     
  6. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    dirt cash please don't dig to deep. the toons should not have a pos ground....
    this was some what a mistake that got away from a shop
    something that is neg is most likely touching the toon now this would not matter if everything was right but unlike cars you don't ground to the chassis and the boat has more none conductive materal than conductive so something like this at time may not be found for years
     
  7. Dirt Cash
    Joined: Jul 2007
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SC

    Dirt Cash Junior Member

    So should she neg ground the chassis or leave it ungrounded?
     
  8. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    neg ground the chassis and remove that red wire
     

  9. Dirt Cash
    Joined: Jul 2007
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SC

    Dirt Cash Junior Member

    Got it! Thanks a lot!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.