Assessing Risk in the Deign Process

Discussion in 'Boat Design' started by alex fletcher, Jul 30, 2006.

  1. Willallison
    Joined: Oct 2001
    Posts: 3,590
    Likes: 130, Points: 0, Legacy Rep: 2369
    Location: Australia

    Willallison Senior Member

    Are we trying to assess the legal risk or the health risk? Because, in this instance they are most certainly NOT the same...
     
  2. alex fletcher
    Joined: Jun 2006
    Posts: 54
    Likes: 2, Points: 0, Legacy Rep: 18
    Location: Ettalong Beach NSW Aust.

    alex fletcher Junior Member

    That is really the question from the beginning what are we as designers actually doing to asses eliminate or control any risk arising out of our designs,

    Do we as designers have a duty of care to all people who our designs effect and what is this duty of care?

    No response to litigation only what is the right thing to do, what is the morally correct thing to do? Not what the law says I can get away with!
    yes Will, this post has been high jacked a little towards the legal ramification, rather than the Health and safety ramifications.
     
  3. jehardiman
    Joined: Aug 2004
    Posts: 3,762
    Likes: 1,148, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    Alex, no moral person ever intentionally delivers a product they believe is harmful if used properly. One should never infer evil intent for acts that can be explained by ignorance or stupidity, on either the part of the producer or user. Ignorance, self-delusion, and status quo can allow harmful products to reach the market (look at aspirin), but I doubt that in most cases there was ever a conscious decision to produce a harmful product. Epoxy is a good example; the two components are both toxic, the final product is not. Asbestos is another good example, I am sure it saved many more lives of users than it has taken of installers. It was a good engineering choice at the time; only hindsight has made it a demon. What about all the aluminum we now use...that is beginning to be linked to Alzheimer’s. Should we remove all the aluminum in the world? And don't get me started on dihydrogen monoxide, the second greatest killer of children. Should we ban that substance also?
     
  4. ted655
    Joined: May 2003
    Posts: 640
    Likes: 14, Points: 0, Legacy Rep: 122
    Location: Butte La Rose, LA.

    ted655 Senior Member

    If publicly traded company then Rule #1 is profits trump all other rules.
    Rule #2 is all matters of a hint of liability are signed off on by Jr management And all reports on the project are sent to the newly promoted project manager.
     
  5. alex fletcher
    Joined: Jun 2006
    Posts: 54
    Likes: 2, Points: 0, Legacy Rep: 18
    Location: Ettalong Beach NSW Aust.

    alex fletcher Junior Member

    I must say this please go back to the original question what do we as designers do to identfy any hazard that may arise from or designs?
     
  6. kjellhoegseth
    Joined: Aug 2006
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Norway

    kjellhoegseth Junior Member

    To Mr. A Fletcher. You are quite right about hazard -of course workers working/(exposed to) with all kind of chemical substances ( epoxy ,isocyante etc.) must come under HES consideration . In a book "The Gougeon Brothers on Boat Construction" -Wood and WEST system Materials ISBN 187820750-4this matters as well as other topics on material strength and fatigue are well described -especially if you are working with epoxy resins combined with wood.
     

  7. alex fletcher
    Joined: Jun 2006
    Posts: 54
    Likes: 2, Points: 0, Legacy Rep: 18
    Location: Ettalong Beach NSW Aust.

    alex fletcher Junior Member

    I will ask the question agian how do you as a designer identify any hazard that may arise from the production of your desgined product and do you try to idenify if there is a less hazardous material, substance or process
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.