Basic Salary

Discussion in 'Boat Design' started by tom_fry24, Sep 12, 2006.

  1. tom_fry24
    Joined: Sep 2006
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Dublin

    tom_fry24 Junior Member

    I will be studying marine design next year and I'm wondering what the basic starting salary is for luxury yacht design. Does any one have any ideas? thanks
     
  2. terhohalme
    Joined: Jun 2003
    Posts: 512
    Likes: 40, Points: 28, Legacy Rep: 506
    Location: Kotka, Finland

    terhohalme BEng Boat Technology

    What makes you think that starting salarys should differ somehow either you plan luxury yachts or production boats or clean the office?
     
  3. tom_fry24
    Joined: Sep 2006
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Dublin

    tom_fry24 Junior Member

    so you are saying that accountants get paid the same as street cleaners?
     
  4. jehardiman
    Joined: Aug 2004
    Posts: 3,773
    Likes: 1,167, Points: 113, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    Starting out accounts get less.....poor union.
     
  5. fiberglass jack
    Joined: Dec 2005
    Posts: 463
    Likes: 16, Points: 0, Legacy Rep: 95
    Location: toronto

    fiberglass jack Senior Member

    ***** no money and a long hard road to the top,i know i make more money doing repairs on boats then the guys designing them
     
  6. waikikin
    Joined: Jan 2006
    Posts: 2,440
    Likes: 179, Points: 73, Legacy Rep: 871
    Location: Australia

    waikikin Senior Member

    itchy

    FGJack, the price we pay for that is as you say being itchy all the time, lucky we love it eh. regards from Jeff.
     
  7. UK Nav Arc
    Joined: Dec 2005
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: UK

    UK Nav Arc Junior Member

    The truth is - it all depends on a range of factors. Where are you studying? By marine design, do you mean styling, or engineering/Naval architecture? This makes a difference. Are you starting out on your own (very bad idea, IMHO), or do you want to work for an established designer, or a yacht builder as part of an in-house design team? Will you have specific CAD skills, such as Rhino, AutoCAD etc., or other skills, such as model making or high quality artistic drawing skills? Please post a bit more information and I'm sure you'll get a more accurate answer (as far as is possible!).
     
  8. tom_fry24
    Joined: Sep 2006
    Posts: 16
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Dublin

    tom_fry24 Junior Member

    I will be studing at the University of Cape Town, doing engineering/naval architecture. I'm planning on heading out to work for an established company first with model making skills. Where does that put me? and where is the highest paying places to work? Thanks.
     
  9. Richard Hillsid
    Joined: Mar 2006
    Posts: 117
    Likes: 4, Points: 0, Legacy Rep: 19
    Location: Scandinavia

    Richard Hillsid Senior Member

    Do you have model making skills?
     

  10. UK Nav Arc
    Joined: Dec 2005
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: UK

    UK Nav Arc Junior Member

    A good degree will probably make a difference, especially as modern larger vessels are closer to ships than yachts, especially large motor superyachts. As a Naval Architect, you'd probably start at around £20K in the UK, but probably less if you're building models - at the last place I worked where models were built in-house, the experienced craftsmen making the models were probably around 10% down on the engineers/nav arcs. There is a lot of competition though - you will have to be good to get a good salary! Top salary for an engineer/nav arc in the Uk is probably around £50k after quite a few years and CEng.

    Short term contracts are better paid, but less secure, maybe around £30/hr tops for a new graduate. You may find, however, that you'll have to spend a couple of years at a relatively poor salary while you "learn the job", as a degree only really gives you the basic tools!

    There is a famous saying that the best way to make a small fortune in small craft is to start with a large fortune - only the very best designers, probably around 5% of all the designers out there, are on the big money, and even then it isn't that big compared to accountants, solicitors etc.

    Hope this helps!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.