Rig and Sails

Discussion in 'Multihulls' started by chapala, Apr 11, 2014.

  1. chapala
    Joined: Apr 2014
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Del Mar

    chapala New Member

    I have an aluminum mast with Navtec rigging and sails from my 36' Acapella the rig is in great shape and would be terrific for a home built boat.The rig is in San Diego.
     
  2. R.Finn
    Joined: Dec 2013
    Posts: 89
    Likes: 1, Points: 0, Legacy Rep: 20
    Location: Slidell, Louisiana

    R.Finn Junior Member

    Do you have any pictures and dimensions?
     
  3. chapala
    Joined: Apr 2014
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Del Mar

    chapala New Member

    Mr.Finn,I just returned from Slidell in Jan.where I purchased Phoenix and am restoring her,maybe you know the boat.Anyway the rig is from a 36' Acapella and is 43' 8.3"x6.8"d section and the boom is 15"6"upper cap shrouds are solid rod and the rest is 7x19 all is in very good condition,the mast is anodized but if I were doing it I would do a nice LP finish,the sails are as follows (1) main four batten,(1) Jib,(1) light genoa,(1) Genoa never used,if I had an email I could probably send photos...Gerry
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.