R/C boat sails

Discussion in 'Sailboats' started by gonzo, Jan 11, 2011.

  1. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    What companies specialize in sails for R/C boats?
     
  2. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

  3. Submarine Tom

    Submarine Tom Previous Member

    Gonzo, if I may ask, what's your mast height?

    Feet, inches, cm, meters, cables, furlongs, I don't care...

    -Tom
     
  4. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I don't have a boat needing sails, but was thinking of building one this Spring.
     
  5. Submarine Tom

    Submarine Tom Previous Member

    Great idea! There's a group here that meet every week for 'round the buoy racing.

    What sort of mast height, or boat length, are you considering?

    Maybe that depends on what's available for sails...?

    -Tom
     
  6. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    If there are some used sails that are not good for racing any more, I am interested. I don't have a boat length in mind yet, but could build to the sails available.
     
  7. Submarine Tom

    Submarine Tom Previous Member

    I don't get out that way anymore but you can probably find a group on Google, maybe even close to you.

    Their boats are about a meter (yard) long.

    -Tom
     
  8. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    If you're interested in racing you can't beat the IOM class-worldwide top notch competition. Otherwise find a club near you and race what they race. If you're interested in development there are a few recognized development classes; however, generally, they ban modern technology like movable ballast and spinnakers. Even so, they can be very expensive. One of the most "fun" boats I raced was the RC Laser-very well designed and just a blast to race and relatively inexpensive.
     
  9. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I am not interested in racing, just playing.
     
  10. Submarine Tom

    Submarine Tom Previous Member

    Maybe you could just go around the buoys in the opposite direction while they're racing, that would be fun.

    Just kidding.

    -Tom
     
  11. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Playing is fun-did these ,first as experiments then as a business for a while. Had my full size sailmaker-Sails by Morgan- build the sails:
     

    Attached Files:

  12. messabout
    Joined: Jan 2006
    Posts: 3,367
    Likes: 510, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    Gonzo; If you just want to fool around with an RC model, especially on the cheap, then consider the Footy class boat. The boat and sails can be made for about ten dollars US not including RC gear. The boats are tiny but great fun. There is active class racing going on all over the world. Check out the boats on the internet. The sails are often made from plastic bag material for this class. For larger more serious boats, the material of choice these days is called Tri spi. It is mylar with reinforcing strands molded in. It is not cheap but is very durable. Doug listed major sail makers that are excellent craftsmen. Sails for the IOM will cost in the region of $150 for main and jib. You can easily get a thousand dollars, or a lot more, invested in a serious RC boat. (I blew through $1800 on an EC12 that I built and that was considered about average cost....EC12 is a 59 inch replica of a 70s vintage Americas cupper. EC12 is a fiercly competitive racing class) That is why I suggested the footy. I warn you that RC modeling is addictive, especially if you start messing around with other modelers.
     
  13. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Thanks, that is more like what I am looking for. It makes no sense for me to spend too much money if I am not racing. That is why used sails could work.
     
  14. Earl Boebert
    Joined: Dec 2005
    Posts: 392
    Likes: 62, Points: 28, Legacy Rep: 302
    Location: Albuquerque NM USA

    Earl Boebert Senior Member

    Another possibility if you like to build is the RG-65 class. 65cm LOA, about 1kg displacement, can use a 500g trolling sinker for a bulb. Large enough to sail realistically, small enough to transport easily rigged. For just playing around, single panel sails from lightweight kite material work fine. You can build one for around $200. Simple box rule (LOA, sail area, mast height) permits a lot of innovation. A CD image with rules, plans, pictures and so forth can be downloaded from:

    http://dl.dropbox.com/u/2751363/RG65 CD.zip

    I second the warning that RC sailing can be addictive, especially if you start racing. As Halsey Herreshoff said after we introduced him to it: "You people are just as passionate and dedicated as the big boat sailors, and you're just as cut-throat on the water."

    Cheers,

    Earl
     

  15. latestarter
    Joined: Jul 2010
    Posts: 402
    Likes: 51, Points: 28, Legacy Rep: 233
    Location: N.W. England

    latestarter Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.