Initial Stability, draft and trim with Maxsurf Stability

Discussion in 'Software' started by Rabah, Jun 7, 2016.

  1. Rabah
    Joined: Mar 2014
    Posts: 256
    Likes: 10, Points: 18, Legacy Rep: 50
    Location: Bulgaria

    Rabah Senior Member

    1. First in the list „What to do” it is necessary to pick “Specified condition” - see Fig 1.
    2. It is necessary indicate Load case - see Fig 2.
    3. Then it is necessary press the button “Specified condition” - see Fig 3.
    4. In the appearing table - see Fig 4, it is necessary make a mark on:
    - Fixed Heel = 0 deg if the chosen Load case does not have asymmetry be relative CL
    - Trim-Free to Trim
    - By the cursor we select “Get Load case Values” and appear Displacement, LCG, TCG and VCG for chosen Load case
    5. It is necessary pick Wave condition. We select "Flat" Waveform - see Fig 5.
    6. We press the button “Start Analysis” - see Fig 6.
    7. Then we press the button “Current Results Window” - see Fig 7.
    8. There is the table with final outputs - see Fig 8.
    9. Sectional Area Curve we can see on Fig 9.
    _____________________
    NA Razmik Baharyan
     

    Attached Files:

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.