freeship question

Discussion in 'Software' started by Robert Wager, Dec 14, 2017.

  1. Robert Wager
    Joined: Dec 2017
    Posts: 2
    Likes: 0, Points: 1
    Location: Ontario Canada

    Robert Wager New Member

    Good day folks
    I have downloaded free versions of Freeship both 2.6 and 3.13
    In each case the crease command is inactive; is this common or is there a way to activate it
    Also tried Delfship but my graphics card is to old for the programme to function
    Your ideas are welcome
    Bikerbob
     
  2. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    When you just open Freeship many commands are inactive. You need first to start a new project (Ctrl+N). Could be this your problem?
     
  3. Robert Wager
    Joined: Dec 2017
    Posts: 2
    Likes: 0, Points: 1
    Location: Ontario Canada

    Robert Wager New Member

    I am attempting to recreate the lines for the Snipe class; have all the coordinates entryed; but has a round bilge
    What I require is a hard chine.
     

  4. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    You may have to add a series of control points on the surface, duplicates, along the line that defines the, chine.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.