converting mainsail

Discussion in 'Sailboats' started by Todor, Sep 1, 2009.

  1. Todor
    Joined: Jan 2009
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Varna,Bulgaria

    Todor Junior Member

    Hi all,
    Shortly the story; I am building a motorsailor Kodiak 29 (see Glen L projects).
    Meantime I have found a new mainsail with following dimensions; Luff -11.10m,Foot 3.75m.
    Sailing plan of the boat shows luff 9.10m;foot 4.42m.
    Question;

    Is it possible at all to adjust this sail to sail plan dimensions and if so how?

    I already have spoken with sail maker "possible ,but you know..."

    Regards
    Todor
     
  2. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    A good sail maker can make these types of alterations, but they don't like to. Even with them, often the shape isn't ideal and the draft isn't where you'd prefer. I'm also fairly sure it's not as economical as having a well setting sail made, in the big picture.
     
  3. Munter
    Joined: Jul 2007
    Posts: 285
    Likes: 12, Points: 18, Legacy Rep: 125
    Location: Australia

    Munter Amateur

    reducing the luff length isn't too hard. extending the foot is more of a pain. It would probably be better to get a sail that is oversize in all dimensions and then cut it down rather than trim from one end and add to the other. Keep in mind that good sails must also be the right weight cloth for the application and that using the wrong weight can result in a sail that is insufficiently strong for the job or too heavy to set in light breezes. Good luck regardless.
     
  4. Todor
    Joined: Jan 2009
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Varna,Bulgaria

    Todor Junior Member

    Thank you,
    I have idea : cutting the sail head,converting it to square top mainsail,converting the two upermost battens to full lenght.
    The foot and leech remain the same.of course I will loose 1,5 m2 area,but any way this is a motorsailor ?
    Once again thanks ,if you could comment last madness will be O.K.
    Todor
     
  5. Munter
    Joined: Jul 2007
    Posts: 285
    Likes: 12, Points: 18, Legacy Rep: 125
    Location: Australia

    Munter Amateur

    There is a lot more to a square top mainsail than just the square outline. The cloth alignment will be wrong if you just cut the head off and put in a new patch at the new location. You will also need to look at batten angles and positions if you want to have any chance at it looking reasonable under sail.
    Also be aware that big square tops require a good strong vertical force at the clew to get the head to stand up, otherwise they will just twist off and be ineffective. Do you have a strong vang or a long traveller?
    Sorry for sounding negative but I don't know if you're going down a sensible path here...
     
  6. Todor
    Joined: Jan 2009
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Varna,Bulgaria

    Todor Junior Member

    Thanks,
    I realy wish to look resonable under sail,that why I will think very seriously on your comments,once again thanks I will revert
    Regards
    Todor
     

  7. Brent Swain
    Joined: Mar 2002
    Posts: 951
    Likes: 38, Points: 0, Legacy Rep: -12
    Location: British Columbia

    Brent Swain Member

    Cutting a bit of the foot would be a better idea, if your leech is too long. Sometimes sailmakers refuse to alter a sail, on the assumption they can force you to hire them to build you a new sail, good economics for them, bad economics for you. We are awash in perfectly good, slightly used sails, at a fraction ther cost of the material, let alone the labour.
    Brent
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.