charging system on a 1999 25hp johnson

Discussion in 'Outboards' started by valvebounce, Jun 23, 2020.

  1. valvebounce
    Joined: Dec 2010
    Posts: 577
    Likes: 15, Points: 18, Legacy Rep: 124
    Location: manchester uk

    valvebounce Senior Member

    The motor number is--J25 RLEEB
    I don't have much idea about the system,but there are 3 wires that are capped off on the engine.They come from under the flywheel/magneto.
    Would these be the wires required to enable the motor to charge a battery?
     
  2. kapnD
    Joined: Jan 2003
    Posts: 1,300
    Likes: 414, Points: 83, Legacy Rep: 40
    Location: hawaii, usa

    kapnD Senior Member

    You need to look up the manufacturers specifications for that motor and compare them to specs for a motor that is built to charge a battery.
    It takes more than current to properly charge a battery!
     
  3. valvebounce
    Joined: Dec 2010
    Posts: 577
    Likes: 15, Points: 18, Legacy Rep: 124
    Location: manchester uk

    valvebounce Senior Member

    Ok,thanks.I thought with the year being 1999,it might be readily equipped.
     
  4. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    yes 2 cyl small engines had a 3phase alternator.
    Just buy the correct rectifier and you will have a charge system, 4 amp I think it was
     

  5. valvebounce
    Joined: Dec 2010
    Posts: 577
    Likes: 15, Points: 18, Legacy Rep: 124
    Location: manchester uk

    valvebounce Senior Member

    Many thanks PB,that's good news
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.