Best simple 30' cruising cat

Discussion in 'Multihulls' started by frank smith, Feb 15, 2011.

  1. frank smith
    Joined: Oct 2009
    Posts: 980
    Likes: 14, Points: 28, Legacy Rep: 185
    Location: usa

    frank smith Senior Member

    What is the best simple build cruising cat in the 30' range .
    Are vee or dory hulls any good ?
     
  2. luckystrike
    Joined: Feb 2010
    Posts: 251
    Likes: 32, Points: 28, Legacy Rep: 92
    Location: Germany

    luckystrike Power Kraut

    Wharram 30 comes to my mind first. Vee- or or very narrow doryhulls are ok if it is a cruising cat. If you want to have more space and interior volume take a look at Bernd Köhler's KD 860. (second thought). Especially the 30' Istambul version.

    http://ikarus342000.com/P86page.htm
     
  3. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

  4. frank smith
    Joined: Oct 2009
    Posts: 980
    Likes: 14, Points: 28, Legacy Rep: 185
    Location: usa

    frank smith Senior Member

    I have looked at all your designs . Could "Gypsy" be stretched to 30'+ ?
    If not Gypsy , then Romany works , and I dont think the extra chine amounts to much more work .
     
  5. jamez
    Joined: Feb 2007
    Posts: 563
    Likes: 65, Points: 28, Legacy Rep: 231
    Location: Auckland, New Zealand

    jamez Senior Member

  6. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    For sheer simplicity, and maximum "boat per dollar", it's hard to beat a Wharram. If you don't mind a bit more time and effort to build it, Woods' cats seem to be somewhat more sophisticated and will likely offer more living space for a given length (Gypsy - Eclipse - Romany combined fill in the 28-34' class pretty well). If you're not averse to slightly weird boats, consider looking at proas of 40-45' or so, which are about the same weight and volume as 30' cats. They're rare, but they do exist, and can offer excellent performance on a tight budget.

    Frankly, I wouldn't worry too much about the time spent building the hull bottoms. Single chine, double chine or round makes a huge difference to the hull bottom build time, but only a very tiny difference in the overall build time and cost. Unless you have your heart absolutely set on a particular build method, I'd suggest picking the design with the layout and performance characteristics you're looking for, and adapt your build process to suit the boat.
     
  7. HydroNick
    Joined: Apr 2010
    Posts: 90
    Likes: 4, Points: 8, Legacy Rep: 38
    Location: British Columbia

    HydroNick Nick S

    Look at the K-Designs Duo 105. It's pretty smokin'. 10.5 m >34 ft.
     
  8. rayaldridge
    Joined: Jun 2006
    Posts: 581
    Likes: 26, Points: 0, Legacy Rep: 322
    Location: USA

    rayaldridge Senior Member

    I'd cast my vote for a Woods cat. These are fast and seaworthy, by all accounts, and Richard prototypes his own boats, an increasingly rare, but very reassuring approach to design. He puts his money where his drawing board is, to put it another way.
     
  9. redreuben
    Joined: Jan 2009
    Posts: 1,999
    Likes: 223, Points: 63, Legacy Rep: 349
    Location: South Lake Western Australia

    redreuben redreuben

  10. ruggerodn
    Joined: Jan 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Italy

    ruggerodn New Member

  11. Blacky
    Joined: Mar 2010
    Posts: 21
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Germany

    Blacky Junior Member

    if it neednt be demountable, take a look at: Jarcat CC29
    simple to build, much room, real double berths, secure mid cockpit, about 1000kg load capacity

    if a trimaran may come up as alternative: the one and only Searunner 31
     
  12. catsketcher
    Joined: Mar 2006
    Posts: 1,315
    Likes: 165, Points: 63, Legacy Rep: 790
    Location: Australia

    catsketcher Senior Member

    It is a little hard to work out what the best design is with so few design constraints. The "best" design will be the one that fits as many of your needs as possible. First thing to do is really sit down and work out what you want in a multi and see how many of these can be achieved.

    As for setting a length first - this is probably a mistake unless you own a dock or marina berth that can't take anything longer than 30ft. If you have selected 30ft because you think that is all you can afford then state that as part of the specifications. Length itself should be a little rubbery.

    Take the Wharram for example. No Wharran will ever win a design competition with boats of the same length unless it is for economy. The large overhangs mean that a 30ft Wharram will be lighter, cheaper and less commodious than a 30ft cruiser from Richard Woods. So the Wharram is cheaper but also much less boat.

    Sit down and write a full specification. If you have the money talk to a few good designers, if you don't go and earn some until you can afford good plans. You will save heaps in the long run.

    cheers

    Phil
     
  13. DarthCluin
    Joined: Mar 2009
    Posts: 131
    Likes: 3, Points: 0, Legacy Rep: 47
    Location: Florida

    DarthCluin Senior Member

  14. redreuben
    Joined: Jan 2009
    Posts: 1,999
    Likes: 223, Points: 63, Legacy Rep: 349
    Location: South Lake Western Australia

    redreuben redreuben


  15. ruggerodn
    Joined: Jan 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Italy

    ruggerodn New Member

    nice, very similar to the Kurt Hughes 30D
    I think using Cylinder moulding method, and without the pod it's possible to make a cheaper boat
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.