Axopar hull style

Discussion in 'Boat Design' started by A B, May 1, 2019.

  1. Mr Efficiency
    Joined: Oct 2010
    Posts: 10,386
    Likes: 1,045, Points: 113, Legacy Rep: 702
    Location: Australia

    Mr Efficiency Senior Member

    You are right, rwatson muddies the waters with the "new keel technology" video, I am blaming him ! :) However, all I see with the two boats you posted is a stepped vee hull with a "different" look, owed to the plumb bowed, minimal flare topsides forward. Not a new idea, basically, with the bottom.
     
  2. gtflash
    Joined: Jun 2006
    Posts: 128
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: uk

    gtflash Senior Member

    I am always fascinated how they control bow steer with plumb bowed boats. Fine at slow speeds, I imagine. Axopar may not be racers but they move.
     
  3. cracked_ribs
    Joined: Nov 2018
    Posts: 160
    Likes: 146, Points: 43
    Location: Republic of Vancouver Island

    cracked_ribs Senior Member

    That is something I also wonder about. It may be just a product of my experiences running into and out of big rivers but bow steer is a tendency I would rather avoid.

    I have a hard time imagining how a sharp plumb bow works in big following seas. It seems problematic.

    Other than that I do like the axopars.
     
  4. BlueBell
    Joined: May 2017
    Posts: 2,704
    Likes: 979, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    CR,
    Have you ever driven one?
    I have and it was a pleasure.
    I can't imagine anyone not liking them.
    Why?
     
  5. cracked_ribs
    Joined: Nov 2018
    Posts: 160
    Likes: 146, Points: 43
    Location: Republic of Vancouver Island

    cracked_ribs Senior Member

    I haven't driven one, which is why I wondered, rather than simply saying "that doesn't work."

    In rough water, though, my experience has been that any bow which really cuts in deeply, doesn't handle big following seas well.

    I'm currently building a boat with a sharp, plumb bow, or nearly plumb...but that's because I've relocated to a place where we don't really get rough water: just south of Nanaimo.

    In other boats with sharp bows I find that unless you keep your speed up, big following waves really want to sling you around.

    That's why I was curious about the claims of the axopars being good rough water boats. To me they look like good boats for chop, like we get around here. But not big seas.

    But the only person I know who's spent any time in one, has never had it off the west coast of the island. Just on inside, so no real rough water opinions from him.
     
    BlueBell likes this.
  6. BlueBell
    Joined: May 2017
    Posts: 2,704
    Likes: 979, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    CR,

    Do you ever come to Victoria?
    I can get you a test drive on an Axopar even if you never plan to buy one.

    BB
     
  7. cracked_ribs
    Joined: Nov 2018
    Posts: 160
    Likes: 146, Points: 43
    Location: Republic of Vancouver Island

    cracked_ribs Senior Member

    I do, in fact - next time I am heading down that way I might hit you up for that, thank you!
     
    BlueBell likes this.
  8. BlueBell
    Joined: May 2017
    Posts: 2,704
    Likes: 979, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    PM me in advance as I'll have to arrange it.
     

  9. cracked_ribs
    Joined: Nov 2018
    Posts: 160
    Likes: 146, Points: 43
    Location: Republic of Vancouver Island

    cracked_ribs Senior Member

    If I'm coming down I'll be sure to give you plenty of notice, thanks very much.
     
    BlueBell likes this.
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.