Above the water line paint,No primer?

Discussion in 'Boat Design' started by wrbowcal, Feb 2, 2011.

  1. wrbowcal
    Joined: Apr 2010
    Posts: 38
    Likes: 2, Points: 0, Legacy Rep: 16
    Location: Crowsnest pass, Alberta

    wrbowcal Junior Member

    I have been working on my boat for 2 months straight and I am getting close the gel coating and painting stage.My question is can I get away without using primer above the waterline? The paint is a high performance polyurethane top coat made by endura high ISO VOC but great paint.I would just like to clean,sand and shoot it with topcoat.The boat is a 2750 and I really don't want to have to sand the primer.Here's a link to the paint if will help.

    http://www.endura.ca/products/Topcoats/ex2c.html
     

    Attached Files:

  2. Landlubber
    Joined: Jun 2007
    Posts: 2,640
    Likes: 125, Points: 0, Legacy Rep: 1802
    Location: Brisbane

    Landlubber Senior Member

    ....all depends on just how nice a job you wish to end up with, the gelcoat is quite porous, it will most likely show imperfections in the linear urethane, which has an exceptional ability to be very glossy if done right. The two pack undercoat will fill these minute imperfections and allow a better spray finish......but you already knew that anyhow didn't you....do it once and do it right.
     
  3. michael pierzga
    Joined: Dec 2008
    Posts: 4,862
    Likes: 116, Points: 0, Legacy Rep: 1180
    Location: spain

    michael pierzga Senior Member

    Very difficult to produce a good job without a primer coat. Red will be particularly challenging. Awlgrip or any 2 part is applied very thin. Any surface imperfection or surfacing filler will show thru.

    Also the primer makes the topcoat paint flow better and allows you to judge topcoat film thickness. Primer is much easier to sand than topcoat...go primer, put a heavy coat on, two times around...sand flat with 320 paper , wash with soap and water , then topcoat, two times around. Either spray or brush roller, this is how the Pro's do it.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.