yes, north county san diego. the problem youll run into in this part of the world is there are very few (read "expensive") do-it-yourself...
understand. my place will be available end of next year so that gives you some time. 20x85 covered, steel 6-pad cradle, likely some materials...
im in vista, nice boatyard on 1/2 acre. ill be splashing my project next november if you can wait a bit. pm for etails
not really sure you have a "problem"... i once ran a rawson 30 up onto a giant log, at speed (6.5kts). and just slipped right off and kept going....
yeah, im bummed about the waist too. i re-use as much as i can, but peel ply is a one off necessity. think of it this way... peel-ply used...
i like rip stop. straight nylon or poly can be a bit of a challenge if bought too light weight. opt for heavier at first til you get used to...
the local fabric store has everything 30% off the last weekend of every month. i stock up on ripstop nylon and poly dress liner usually from the...
"I can't imagine trying to make roving turn a 90 degree bend around a timber." generously radius the corners/transitions... problem solved.
you should be using 45/45 biaxial-stitched cloth and not roving. use peelply where ever practical. buy a small scale and weigh out your cloth...
yes, Y39 aft cockpit extensively modified. there where only 8 of them made as i understand it. aside from the gas lockers, it gets me increasing...
mine was a bit less ambitious, the goal being to create a proper lazarette/propane locker. i left the original reverse transom in place and...
or maybe these pre-made cut stone mosaics from the box store but with epoxy grout?
thought about bed liner at one time, but its a little bit too industrial for my floating home. the sole is 3/4 marine ply with a layer of 22oz...
cost would be less when you consider the hours and hours installing solid teak and holly, that im sure of. weight im not too worried about - i...
saw some guys installing this troweled mix of epoxy and pebbles in a neighbors sauna and had the thought it would make an excellent material for...
