Don't forget the hose clamps and strips of rubber around the crank shaft so as to maintain oil pressure. I have done this to an engine it ran for...
None of the above. The rumble comes from the stern bearing and is a totally different sound to the prop noise. The rumble stops because the...
Yes that's right, much quieter plus it lowers the shaft rpm with load.
A little background. I trained in a shipyard, both on the floor and in the design office. The foundry cast props up to 10feet in dia. After our...
[ATTACH] Look what I found the drawing I made for the taper lock It's a long time now since I measured it I thick 250rpm@7 knots. Also when...
The first thing to consider is the length as that determines the choices that follow. A couple having a boat custom built for offshore cruising...
This is something you, along with many others, clearly know very little about because there is little research published on this subject. After...
Nick I'll get back to you with more ideas and why The slang comes from home - Just another fxxxxx white boat it doesn't mean the colour
What do these boats have to do with building a new 45 to 50 foot offshore cruising yacht?????????
This has become the forum to find ugly white boats I feel sorry for leadglobal
[ATTACH] [ATTACH] Maybe it should be the cost of NOT going cruising most people are being farmed just like sheep and cattle maybe more like sheep....
Well done you lot I bored out the 400 mm dia. pulley hub then machined a taper lock from 316 s/s There's no key its not needed Then grit blasted...
This is a cruiser's nightmare get your act together
[ATTACH] It's a nice day in the pilothouse at Tory Is Ireland its only blowing 45 knots as the spray and seaweed fly across the boat tomorrow's...
[ATTACH] [ATTACH] This work for you ? - for more imfo maybe a new thread