Recent Content by Paul D

  1. Paul D
    Post

    John welsfords trover plywood boat

    I'm looking to power it with a 18 to 20hp outboard ...I could get myself in a bit of trouble with a 50hp I'd say.... but good to know what the...
    Post by: Paul D, Jun 16, 2019 in forum: Wooden Boat Building and Restoration
  2. Paul D
    Post

    John welsfords trover plywood boat

    Thanks for advice really appreciate it .....I think the trover will suit my needs then being reasonably economical to build which is the main...
    Post by: Paul D, Jun 15, 2019 in forum: Wooden Boat Building and Restoration
  3. Paul D
    Post

    John welsfords trover plywood boat

    Thanks for info messabout....i was worried about stability with pulling a fish in over the sides etc but good to know it should have good...
    Post by: Paul D, Jun 12, 2019 in forum: Wooden Boat Building and Restoration
  4. Paul D
    Post

    John welsfords trover plywood boat

    Thanks for the info good to know ....I'm guessing that these hull designs like the trover and diablo will feel a little tippy lightly loaded but...
    Post by: Paul D, Jun 12, 2019 in forum: Wooden Boat Building and Restoration
  5. Paul D
    Post

    John welsfords trover plywood boat

    I only be launching off beach on calm days maybe 1 foot breakers at most....its mostly a sheltered beach where we launch....thanks
    Post by: Paul D, Jun 11, 2019 in forum: Wooden Boat Building and Restoration
  6. Paul D
    Thread

    John welsfords trover plywood boat

    Hello everyone ... Just wondering what people's thoughts are on John welsfords trover design?...beam is 1.4metres....17ft length...8 to 30hp...
    Thread by: Paul D, Jun 11, 2019, 13 replies, in forum: Wooden Boat Building and Restoration
  7. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Thanks Phill ...is something like the transom of the tango skiff kind of what u mean?with the angle of the inside of the notch? [ATTACH]
    Post by: Paul D, Mar 30, 2019 in forum: Boat Design
  8. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Yea would be bit more work to build to cherz
    Post by: Paul D, Mar 30, 2019 in forum: Boat Design
  9. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Would it help any with planing or anything with a transom like this... [ATTACH]
    Post by: Paul D, Mar 30, 2019 in forum: Boat Design
  10. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Thanks for your time mate no doubt i will have some more questions..cherz
    Post by: Paul D, Mar 29, 2019 in forum: Boat Design
  11. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Thanks mate appreciate the advice .....makes sense ...i may just have to find myself a boat trailor or bigger home trailor ......is it ok to keep...
    Post by: Paul D, Mar 29, 2019 in forum: Boat Design
  12. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    If i keep the hull bottom at just under 4ft wide and flare the sides out a little would that give me more stability? ...i could go wider tho it...
    Post by: Paul D, Mar 29, 2019 in forum: Boat Design
  13. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Yea i like mark bowdidge designs the tropic 14 is a bit big for me the 12ft one is probably not bad ..im not sure what deadrise they are but a...
    Post by: Paul D, Mar 29, 2019 in forum: Boat Design
  14. Paul D
    Post

    Deadrise on 13ft garvey style boat?

    Im planng on about 10hp the tohatsu 9.8hp 2stroke motor its 26kgs and would still suit my punt i built....i thought the shallower i get the...
    Post by: Paul D, Mar 29, 2019 in forum: Boat Design