You really need to make a summary here.
It is possible by input in deck 1 (node) and deck 18 (motions and/or position relative to water surface).
Hi, The mooring line no idea of the problem. I don't understand the description. The FIDA and FIDD cards read the manual. But basically, you...
Hi Ptinou, Not sure you should have two peaks. I sent you an email. Regards
Hi Ptinou, Now that I see your geometry, I think that maybe that is not the best approach to model what you want. I cannot send you a private...
Check AQWA Reference, chapter 5. There it is explained under 'Running AQWA using command file' You basically create a .com file with the...
Hi Ptinou, It doesn't have an influence that you work with ANSYS AQWA, in workbench I guess or AQWA. But, to complete all the stages and do...
Hi Ptinou, Are you sure that frequency is in Hz? Looks more like it is in rad/s. Is the peak of resonance within a range of frequencies you...
Hi mekchu, I will take a look later, if you are interested you could send me a private message with a contact address I might have the time to...
Wrong. First of all: Your Point mass for the cylinder is: M=V x rho (kg) V = Cylinder volume, is it solid? is it a shell with some thickness?...
Actually is like you say. He should define a point mass in the CM of the Cylinder where he inputs mass, CM coordinates and Moments of Inertia....
Looks very messy for such a simple task. First of all start by doing some hand calculations to determine displaced volume, mass, thus buoyancy,...
Hi mekchu, Could you include more details about your model? You can obtain the natural frequencies already in aqwa-librium. Anyway, in...
Hi digijtal, If you post or send me your model I might be able to help you. You cannot really analyse what you say by just using tube...
Hi jehardiman, Where can I extract the phaseing in AQWA? Thanks