Thank you Rumars. Got me thinking for sure. Here are a couple of questions that would really help me out as it seems I’m headed toward a...
Yes ondarvr. You hit the nail on the head. The temperature changes here. It is brutal. R-value causes temperature difference but needed here more...
Hi Rumars. I get your concern and fully understand your points. I’m very well versed in all these things. Resins of all sorts and primers are my...
Thanks for this @philSweet. There is a lot for me to learn here in this answer but it all makes sense. I’m going to be doing this to build a door....
I totally get it. Just wanted to clear one thing up, I’m not looking to have the wood showing at all. The polyester coating will be filled with...
Blueknarr would delamination still be an issue if this was laminated with a sheet say 1/4” marine fir. Or would it still need Fiberglass. Thanks...
Just a photo I pulled off the web. But this structure with several protective coatings I think should be ok. I understand it will be outside but I...
I’m using multiple layers because my last resin layer has to be polyester. This is a polyester product we use with metal fillers for causemetic...
Hello everyone, my first time here. Even thought I grew up 10 feet from the ocean my question is not about boats directly. I’m going to rip 3/4”...
