Thank you all for the information. As I said before, I am pretty experienced with the ply/fiberglass method of construction, but not at all with...
at the end of the day it sounds like trying to do out of anything aside of the ply is a time consuming expensive risk...
Also, with the foam core density, the denser the foam, the stronger and therefore less glass needed?
Alik, Thank you for that advise. I am attempting to do this project in Portugal and for this have a couple of supply issues to deal with. I have...
Fall guy, thank you for your input as well. I am well versed in plywood/epoxy construction and know nothing at all about honeycomb construction,...
Alik, Thank you very much for your helpful post.
I have been thinking about building a tiki 26 and am stuck on whether to use plywood, or to attempt it with polypropylene honeycomb. I am thinking...
Catsketcher, Thanks for your input, especially the part about building vs buying. I don't have a burning desire to build a multi, but am looking...
Richard, Thank you very much for your reply. You make somegood points, especially about straight line sailing and docking a multi. I had a look at...
Phil, As you can see from my previous posts, I am new to the multi world. I am still in the research phase of all this. I am looking for a multi...
Jamez, Thank you very much for that article, that was an awful lot of information packed into a short article!!
I am new to multihulls, so might ask a few dumb questions. While i agree that there is no sense in having more boat than you need, I don't...
Sailing in mid latitudes and tropics. mid 40s is looking like a good size. I spoke with a local boat builder and he said that a multi-chine would...
wow, i just reread my first post, i guess i left some info out. I am looking to sailing cat designs
