Scot, Thanks for the response. I used Plascore PP Honeycomb as my core material. I'm unsure what you mean by green stage but I'm going to guess...
I'm considering doing another boat build via stitch-n-glue using epoxy. One of the issues I faced with my last two builds was trouble with...
Par, pipe...that's brilliant.
So when I built my duck boat I made a minor error. I used a one-way garboard. [IMG] This is a problem because when I hunt marsh grass,...
Tell me about it. At a certain point (when i'm laying down in the boat, I actually wear a hazmat suit because I'm rolling and scooting around....
Sanding is definitely not my favorite part of boat building though it's unavoidable. Wet sanding isn't an option for me as I only have my home...
When you look at the amount of sandpaper you burn through, vacuum filters (even with a dust collector), respirator filters, time, etc. peel ply is...
No, I know it's to be removed. I was originally asking about where the two pieces overlap, would there be a ridge left once removed.
Thanks everyone for the replies. They pretty much have me sold on it. One thing I thought about. Would peel ply aid in preventing Kevlar from...
Ok, I am getting the bug to build another boat in my garage. This will be the third one I have done, but what's holding me back is the thought of...
Another option is to use composite decking as hard points in the deck. You wouldn't want to make the entire deck out of this stuff (very heavy)....
So I'm finishing up my fiberglass duck boat and am about to run the electrical. I'm no means an expert, however I'm pretty comfortable with doing...
