If the designer has not been paid, and the client does not own the design, then I have no interest in working on this.....
If you are still looking for someone, then send me an email at greybarn@myfairpoint.net.
What color are you going to paint the hull? If you are going paint it white, then 150F post cure is fine. If you are going to paint it dark blue...
Vinylester infusion Like most things with composites, the answer to that question is not a simple one. There are several Vinylesters that can be...
Forespar has a similar thing available for their Marelon seacocks. We always use the Forespar seacocks and have used their version with the...
The other way to look at is how strong is the halyard and the winch the halyard is getting loaded on to. I think the bow sprit wants to be...
why not use Starboard? It is a plastic that is often used for that sort of thing and won't ever rot....
Try Marine Concepts in Fort Myers Florida. They are the best for our needs. Regards Peter
Its based on manufacturers recommendations.... We actually push it out a little farther than that just to keep from frying someones brain....
We set the radar mast height so that the lower edge of the beam can't hit anyone within 6 feet.
Ronstan has something they call a "Magic Wheel" which would work.
Get a copy of Vectorlam from Vectorply. You can download the spreadsheet from their website.
Check the Morris Yachts website.
There are a few ways to do it. Depending on the size of the part, you can 1) Glue on (with something like Plexus) a piece of hard glass that has a...
We use a flush seacock, with a Groco slotted strainer, facing forward, on the outside surface of the hull.