Short Shaft / Surface Drive / Mud Motors

Discussion in 'Propulsion' started by DCockey, Mar 20, 2017.

  1. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    A different type of outboard motor which I had not seen before are designed for shallow water use. Various manufacturers refer to them as "short shaft", "surface drive", and "mud motors". One manufacturer claims to have developed their units after initially building "long tail" units based on units seen in south-east Asia.

    They have an air cooled engine, up to 37 HP mounted high with belt or shaft drive to the lower unit which has the propeller mounted considerably further rearward than a standard outboard. They are designed for use in shallow water with some videos showing boats going through thin mud, and also appear to be designed for routine impacts with stumps, logs, etc. The most popular engines appear to be Vanguard two cylinder V units. Most manufacturers use belt drive though at least one uses shafts and gears.

    http://www.mudbuddy.com/about.htm
    http://gator-tail.com/motors/
    https://prodriveoutboards.com/
    http://www.godevil.com/inventorynew/surface-drive-engines-2/
    http://copperheadmfg.com/motors/
    http://www.bossdrives.com/
    http://www.mudbuddy.com/index.htm
     
  2. tom kane
    Joined: Nov 2003
    Posts: 1,768
    Likes: 49, Points: 58, Legacy Rep: 389
    Location: Hamilton.New Zealand.

    tom kane Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.