Question about First intercept for checking Intact Stability

Discussion in 'Stability' started by Phieuduxd, Jul 4, 2016.

  1. Phieuduxd
    Joined: Jul 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: VietNam

    Phieuduxd New Member

    Dear All,
    How to calculate First Intercept Angle in Righting Arm and Heeling Arm Curves (see attached figure)[​IMG].
    Please help.
    Thanks,
    Phieu
     
  2. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Assuming you have no more calculation tools, and only the graph you show us, the first thing you should do is to point in the coordinate axes the angles of heel (X axis) and GZ values (Y axis).
    That done, with a ruler to measure you take measurements of each of the coordinates of the intersection point and interpolate.
     

    Attached Files:

  3. Phieuduxd
    Joined: Jul 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: VietNam

    Phieuduxd New Member

    Thanks for your answer my question. Good day TANSL.
     
  4. Rabah
    Joined: Mar 2014
    Posts: 256
    Likes: 10, Points: 18, Legacy Rep: 50
    Location: Bulgaria

    Rabah Senior Member

    Hi Phieuduxd,
    The problem is posed without one very important improvement: Whence is this schedule?
    In effect it is Fig1-Righting Arm and Heeling Arm Curves for Area of the Residual dynamic stability /criteria 5.v/ from ABS Rules - Steel vessels under 90 m in length - 2011, Part 5, Chapter 8 Vessels intended for Towing, Appendix 1: Intact Stability Guidelines for Towing Vessels.
    See publication by Niru from Philippines: <http://www.boatdesign.net/forums/stability/abs-rules-vessel-intended-towing-operations-stability-55835.html> - attached file.
    In this respect Niru is very correct.
    After improvement for what criterion and under what rules there is the speech then the answer is the following:
    1. If to apply a computer program for calculation of the Intact Stability /approximately GHS, Maxsurf Stability, Delftship Professional, Orca3D or other/ after input of data requiring in the program, the computer itself traces diagrams and receives intersection points of Righting Arm and Heeling Arm Curves.
    2. If to use obsolete graph-analytic method, referred to as the Krylov -Dargnies method, after obtaining righting arms and drawing the Righting lever curve, it is necessary to drawing in too scale and the Heeling Arm Curve which is calculated according to Part 5, Chapter 8, Appendix 1, point 9 - Heeling Arm Curve.
    _________________________
    NA Razmik Baharyan
     

  5. Phieuduxd
    Joined: Jul 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: VietNam

    Phieuduxd New Member

    I got it. Thanks so much Rabah.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.