Need a Design/Engineering Team?

Discussion in 'Services & Employment' started by shalvers, Nov 21, 2007.

  1. shalvers
    Joined: Nov 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SouthEastUSA

    shalvers New Member

    There is a R&D design/engineering team available Jan 2008. The team has the capability to develop/engineer an entire yacht. All are located in the South East US. This is not a package deal so if you are interested in any one of the people let me know and I will get you in contact. I'm not a recruiter - I'm a Design/Prototype Engineer with 18 yrs Experience.

    • Design/Prototype Engineer - Me
    • Mechanical/Propulsion Engineer
    • Naval Architect
    • Prototype Project Manager
    • Sourcing Manager
     
  2. Bad_Trim
    Joined: Feb 2006
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: West Coast

    Bad_Trim Junior Member

    Experienced in what size vessels?
     
  3. shalvers
    Joined: Nov 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: SouthEastUSA

    shalvers New Member

    Up to 100' (30m), we have just finished up a 47' and 37' production models. Some of us have experience in runabouts, cruisers and sport cruisers also.
     
  4. member 22129

    member 22129 Previous Member

    Hello sir
    I am from Dubai experienced yacht builder, good knowledge in production line, Can you give me some more details of your model and company
     
  5. oldsalt1
    Joined: Dec 2007
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Boston, MA

    oldsalt1 Junior Member

    Have Stability Concerns

    I have a few basic questions regarding my vessel, a 1981 steel trawler.

    I wanted to remove the existing steel mast and boom that are on top of my upper structure/pilot house.

    A friend thought that I should have someone that has knowledge of stability, review my decision to remove the vessel's mast and boom.

    I never use the mast/boom and the former owner never used it. It would free up some room. I am not sure that it is has a positive effect since the boat weighs about 77,000. I also thought it may have a negative effect since it is so very high on the vessel and rather than aluminum or composite, it is quite heavy being constructed of steel.

    I would appreciate any kind advice.

    Thank you.

    Regards,
    Bob Carye
    612-414-6401





     

  6. hudson55
    Joined: Dec 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Texas

    hudson55 New Member

    I am looking for a design manager for an in house position. Design experience with boats 22-52 feet (sport) and the sleek designs coming out of EU (UK, Italy etc) Based in Florida.If you know anyone, have them contact me at sheila.cassidy@hudson.com for details.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.