54' Catamaran Molds

MOLDS FOR SALE to produce
54’ Power Catamaran
54’ x20’ x8.5’ FRP
United States Coast Guard Certified 49 Passenger
Small Passenger Vessel (T)
Partially Protected Route

This project is work in progress.
Approval of plans by USCG 80% complete. (estimate)
Prototype boat, has all major glasswork completed including tanks, engine and drive line. No steering, electrical or plumbing. No Interior. Vessel has been built under the inspection of the USCG. Approval process well underway.

Please see SeaMasteryachts.com for specs.
Molds are female, professionally built with wood framing. Only one piece has been pulled from these molds. Finish and fairness on Hull #1 is yacht quality. Hull mold consists of 5 pieces, inner and outer port hull, inner and outer Stbd hull, and center piece. Four longitudinal flanged and bolted seams allow for
disassembly. All cabin top molds are seamed along the centerline.

(5) piece hull mold set
(2) piece foredeck mold set
(2) piece cabin house mold set
(2) piece aft deck mold set
(1) engine hatch
(2) cockpit combing
(1) forward seating insert

Molding for stern incomplete.

$800,000 and 5 years has been invested in the design, engineering , plug construction, mold construction and prototype vessel construction.

Vessel for sale, as is where is Ft Lauderdale Fl.
$400,000

Molds for sale, as is where is Ft Lauderdale Fl.
$100,000

Contact
Paul Krier
snarleyowpaul@msn.com

Photos coming soon

 

Eduarto, please call again. Your mesage quality was poor and I have been unable to call the phone number. Call again or E mail with contact info
Thank You
Paul

 

Molds and boat still available
Seeking Offers

$40,000
or best reasonable offer

 

still looking for any offer
there is an opportunity here

 

Boats and mold offered at $150,000 for entire package

 

That is why you can't sell them.

 

Must Go, Make Offer

The molds and the prototype boat, complete with $70k
worth of Yanmars, are available cheap.
Try $95,000 for entire package

 

54 Cat Molds

Must Go
$10k
need work but if you want to build a cat these molds will help
Inspect Ft Lauderdale

 

Please send to me more photos， TKS

Nice。

speedcraft

 

Are the molds still available?

Hello,
I think I spoke with you some time back. are the molds still available? and is hull #1 still available. If so please forward me pictures and detailed information.

Please email me so I can forward you my tel #

All the best,
Randall