200-250hp engine to marinize

Discussion in 'DIY Marinizing' started by bcervelo, Mar 15, 2006.

  1. bcervelo
    Joined: Sep 2005
    Posts: 64
    Likes: 1, Points: 8, Legacy Rep: 13
    Location: Somerset West, SA

    bcervelo Junior Member

    Can anyone surrgest a suitable engine to marinize, im looking for around 200-250hp with or without turbocharger.
     
  2. dimitarp
    Joined: Feb 2006
    Posts: 93
    Likes: 4, Points: 8, Legacy Rep: 19
    Location: Bulgaria

    dimitarp Junior Member

    You can use a car diesel engine, but you have to decide the cooling of engine. There will be a trouble for cooling
     
  3. bcervelo
    Joined: Sep 2005
    Posts: 64
    Likes: 1, Points: 8, Legacy Rep: 13
    Location: Somerset West, SA

    bcervelo Junior Member

    Yes i was thinking that, do u know of a suitable make amd model, im not sure how many cars there are with 250hp diesel engines.
     
  4. dimitarp
    Joined: Feb 2006
    Posts: 93
    Likes: 4, Points: 8, Legacy Rep: 19
    Location: Bulgaria

    dimitarp Junior Member

    Here is some cars Dodg RAM 2500 diesel 218 hp
    BMW 330 diesel 220 hp
    Ford Excursion 7300 dieasel LTD 239hp
     
  5. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    Auto engines do not have the "guts" to operate at a good percentage of rated HP , gas OR diesel.

    You need to look at truck engines if you actually want 200hp for long periods of time.

    Many have already been "marinized" , so a look at the MFG site will let you know what is suitable.

    Here in the US the International DT 466 has not been "marinized" so great engines a year or two old are dirt cheap at the wreckers , and have std SAE bellhousings that will fit the marine trannys.

    A turbo is a great idea if you will be pulling a real load at most times. They are very poor if you idle , or operate at very low RPM for cruise.

    FAST FRED
     
  6. Wellydeckhand

    Wellydeckhand Previous Member

    Look for engine with the most common and OEM parts with distributor easier to be found. Truck engine is far more reliable than car engine as they are build to take the punishment anyway.

    WDH
     
  7. The Island Man
    Joined: Aug 2005
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Parksville British Columbia

    The Island Man New Member

    Marinizing 1997 Dodge Cummins Diesel

    :) Hi
    I'm just in the process of marinizing a 1997 Dodge Cummins Diesel 6BTA
    and I don't see anything to different to the Marine Cummins except a whole lot of dollars, mine was an automatic 180hp + a 50hp fuel plate = 230HP and I'm putting it in as an inboard installation, into an old fibreglass lapstrake Bellbouy 25' bought special for this fun project. I'm just finding out about the SAE bellhousing thing now, I think I want a SAE # 3 Bellhousing to hookup a Hurth transmission, but that's not a sure thing because I haven't got a transmission yet ? The Cummins seems to me to be a good choice, they are extremely durable and parts are everywhere, I'm going to use a marine bolt on raw water pump and I have a large heat exchanger and will run a dry stack, and as soon as I have everything working properly I'm going to run it on SVO, because obviously I'm not a millionaire and can't afford to dump 10 gallons of fuel an hour through it, so that's my 2 cents worth. :)

    The Island Man
     
  8. heavyhaulal
    Joined: Feb 2007
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: St.Albert. Ab.

    heavyhaulal New Member

    duramax for marine

    chevy's duramax diesel might be a good choice. find out about the engine on isuzu engine page. google "mother of all maritime links" scroll to "marine diesel"
     
  9. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    "Marine Cummins except a whole lot of dollars, mine was an automatic 180hp + a 50hp fuel plate = 230HP and I'm putting it in as an inboard installation,"

    Those are the auto or pleasure numbers , The PP (prime power ) numbers are for the 6BT5.9 (M) are 104 @ 1500,to 122@1500,,, 122@1800 to 150@1800

    The 6Bta5.9DN (tier 2) 100@1800 to 125@1800

    From Workboat engine list.

    FF
     
  10. charmc
    Joined: Jan 2007
    Posts: 2,391
    Likes: 78, Points: 0, Legacy Rep: 840
    Location: FL, USA

    charmc Senior Member

    There are some good engine recommendations here, most truck engines would make good candidates for conversion.

    One basic but important thing to think of in marinizing, for any engine/transmission accessories bolted on or mounted nearby: imagine something has broken down and you are performing repair or replacement yourself, at sea or dockside. This will help you locate accessories for easier access, and select materials properly.

    Some here may think this is most obvious and doesn't need mentioning, but I recall trying to reach a leaking raw water pump located below and forward of the engine, with only inches of clearance around it and a hot manifold to squeeze by to gain access. A transmission went out once because fluid leaked into the bilge through a corroded length of steel tubing that hung low enough in the bilge to be splashed frequently. Both of these flaws were introduced during construction by a well-known and respected builder of power cruisers and sportfishermen. I've seen similar things in desal plants I've commissioned, such as number tags for on-skid valves facing inward towards the center of the skid, because that's where the assembly tech stood as the system was being built. Ease of access after installation is sometimes ignored or never even considered in a design, and the lucky soul doing the service or repair gets the "benefit". Being both installer and user, you have the opportunity to make life a little easier for yourself.

    Good luck, and enjoy your project!
     
  11. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    An inline will usually allow more room to work on it than a V style.

    Taller and longer perhaps , but frequently made to be serviced from only one side.

    FF
     
  12. fcfc
    Joined: Feb 2005
    Posts: 781
    Likes: 29, Points: 28, Legacy Rep: 399
    Location: france,europe

    fcfc Senior Member

  13. keysdisease
    Joined: Mar 2006
    Posts: 794
    Likes: 43, Points: 28, Legacy Rep: 324
    Location: South Florida USA

    keysdisease Senior Member

    exhaust manifold

    i was thinking about the 6Bt to repower my cruiser. I'm not going to go there now but at the time I was researching fiberglass/ceramic coatings for the exhaust manifold. These coatings bring the temps down pretty far and I was then contemplating covering the coated manifold with dry exhaust "lagging" like on a turbo. An off the shelf heat exchanger with discharge to a spray ring just aft of the Turbo like a standard marine install bypassing the standard water cooled heat exchanger.:idea:

    Simple with the only downside being the extra radiated heat in the engine space, which may not be a factor with the lagging. Anyone ever try this?

    Steve in So Florida:)
     

  14. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    "Simple with the only downside being the extra radiated heat in the engine space, which may not be a factor with the lagging. Anyone ever try this?"

    Lagging is insulation , and as usual the thick stuff is far better than the thin stuff.

    Lag it yourself to see how the boat performs , THEN go to a big boat shop that offers the service and they will come and make templates and produce a REAL efficient and cool set of exhaust manifold and pipe covers.

    Not cheap , but quiets and cools the engine space,well.

    FF
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.