I am aware of an old thread about repurposing the fiberglass bottom of a RIB by building up the sides with plywood. A lot of old RIBs get...
This is a shell of a Rib tender, the boat is already developed with 2D CAD. Even that is part of my learning path with FreeCAD. An open source CAD...
Does anyone know of any davits (factory systems or DIY) set up like this to swing a small punt through 180 degrees from the water directly to...
etude jet dayboat
[IMG] original parent hull [IMG] designed hull I am currently looking at the overall size of the tender/sailing dingy design. I know that I...
Looking for a deck stowable dinghy or tender plan in foam sandwich, 8' max length or nestable, seating for four as a rescue only; three seats with...
[MEDIA] This 98 lbs patented twin-hull boat can carry on board up to three adult passengers. [IMG] [IMG]
A Tender designated for the med. zelfdraining fast and lightly built to go fast with 115 hp (75 km/hour
Steelfish GTS 600 tender speedboat. Designed for aluminium sheets. Easy to build outboard engine driven up to 90 hp speed 60+ km/hour. Building...
Tough small recreational workboat. 6 meter lots of space fast going for 40 hp outboard engine (inboard mounted) designed for aluminium sheet...
