Sailing on the Hudson north of the Tappan Zee
She is undergoing an overhaul this month, but expect to be sailing her soon. 20ft4in LOA, 12ft LWL, 3ft 6in Beam, Draws 3ft 6in...650lbs of Pb...
Hello... I am putting a 'proper bottom' on her for SD... Also lower CG with the Volvo diesel... Everything still expands... Hell of a lot of...
Radius chine plywood Mini 650 racer
Hello... Lot of bother - but fun - so there you go... SH.
Hello... Round portal on rear door needs to centered on rear fixed glass... 3/16 mill or marine at about 8 to 9 bucks a square foot.... Add 10...
Hello... Is this close to what you are asking for then... Nearing 2300 lbs. DISP... SH.
MINI TUG
This is an example of one of the mini tugboats that you can build with the plans from Berkeleyengineering@yahoo.com
Bwl 2.182 [m]; Displacement 1.246 [t]; S 9.681 [m2]; Draft (hull) 23 [cm] Area (hull) 22.723 [m2] (just fo' fun: freeship, 3ds)
Not beamy mini hull. (See the 6.50 design topic in the forum)
hull design of a 650 mini (initial stage)... (2000)