Doug Lord: Single Asymmetric Curved Daggerboard
This board, at the very least would permit vertical lift to be developed along with lateral resistance. If the lift function was not needed in light conditions the board could be retracted enough to just allow lateral resistance.
When the board is retracted it is inside the side to side curved trunk.
Different versions might allow full flying though the characteristics similar to surface piercing foils and altitude control would have to be researched a lot more.
see thread for details:
http://www.boatdesign.net/forums/sailboats/dinghy-design-open-60-influence-36401-11.html
Posted by: Doug Lord - website: https://www.sailwolffoiler.com/wolf/
-
There are no comments to display.
-
- Album:
- Member Album by Doug Lord
- Uploaded By:
- Doug Lord
- Date:
- Mar 17, 2011
- View Count:
- 2,934
- Comment Count:
- 0