Slavishly copying commercial trawler plans for a cruiser

Discussion in 'Boat Design' started by makobuilders, Mar 6, 2014.

  1. makobuilders
    Joined: Feb 2009
    Posts: 131
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Seattle, WA

    makobuilders Member

    This inquiry is about the merits (or lack thereof) of using the design of a commercial trawler for purposes of building a personal cruiser. In my case I own a full set of design drawings for the boat which is an extremely heavy steel model with the following particulars: 50' loa, 47' lwl, 16' beam, 6.5' draft, hard chine, deep bilges, displacement 56 tons at D/L 540.

    There is obviously only so much hard wood interior that you can have, so the extra 20+ tons (over a "normal" heavy displacement cruiser) would provide what advantages?

    I have attached some perspectives that I created from the takeoffs but showing a radius chine version that I am playing with.
     

    Attached Files:

  2. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Why do you need to copy a design of a steel boat?. This boat is designed to achieve features that probably has nothing to do with the boat you want. Do you design the ship you want, with the material you want.
    Need a cruiser have a so big keel?
    You may copy, if you like, the look of the boat above the waterline, with the underwater hull that you really need.
     
  3. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Not advantages but differences include:
    Increased cost of construction.
    Increased fuel consumption.
    Deeper draft which may limit where you can operate, where you can moor or tie-up and may increase cost of hauling.
     
  4. SamSam
    Joined: Feb 2005
    Posts: 3,899
    Likes: 200, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    Is the reason for using these plans is to avoid buying new ones?
     
  5. Westfield 11
    Joined: Apr 2008
    Posts: 215
    Likes: 8, Points: 0, Legacy Rep: 95
    Location: Los Angeles

    Westfield 11 Senior Member

    To the list of drawbacks, add the need for a larger engine to push a wide deep hull, the difficulty and expense of finding a slip for a 16' wide boat in a marina as opposed to the fish docks and the fact that you would need to ballast the boat to keep from running near empty all the time. The sea keeping and comfort is very much affected by running such a hull without having tons of fish and ice in the hold as an essentially empty boat will have a very quick uncomfortable motion.

    I suppose you could add extra fuel tanks and keep them full all the time like a tanker... Maybe you could make some money arbitraging fuel? I hear it is very cheap in Venezuela and expensive in America...... You could probably carry a few thousand extra gallons and the boat would ride on her designed waterline, although cement or water would be cheaper.
     
  6. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    I only need a Mini Cooper, so I'm buying a Suburban . . .
     
  7. Westfield 11
    Joined: Apr 2008
    Posts: 215
    Likes: 8, Points: 0, Legacy Rep: 95
    Location: Los Angeles

    Westfield 11 Senior Member

    It's more like "I have a dump truck already so how can I modify it for my daily commute into Manhattan.".
     
  8. Milehog
    Joined: Aug 2006
    Posts: 571
    Likes: 121, Points: 43, Legacy Rep: 215
    Location: NW

    Milehog Clever Quip

    Boat building materials and fuel are sold by the pound, kilo or whatever.
    20 tons of boat + added fuel use will buy a shelf full of plans from top designers.
     
  9. makobuilders
    Joined: Feb 2009
    Posts: 131
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Seattle, WA

    makobuilders Member

    The points made above are all well-taken, but putting construction cost/fuel burn issues aside, how about a consideration for the advantages of a extra heavy displacement vessel from scratch.

    Possibilities include:
    * Extra heavy scantlings
    * Extremely large fuel capacity (purchasing where cheap and in bulk)
    * Extremely large freshwater capacities
    * Ability to fit in water-ballast tanks to maintain stability as fuel is burned
    * Ability to store tremendous provisions for long durations and bulk purchasing discounts
    * The very deep bilges yield a vessel with lower profile and less windage

    Would like some objective feedback to better balance pros and cons.
     
  10. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Dear friend, you started talking about a cruise and now speaks of a tanker of high autonomy. Where do you want to get at?. You should define your LOR before wondering if a hull serves or does not serve your goals.
     
  11. kerosene
    Joined: Jul 2006
    Posts: 1,285
    Likes: 203, Points: 63, Legacy Rep: 358
    Location: finland

    kerosene Senior Member

    Everything is a compromise. Is it a benefit to have sturdy scantlings? Yes can be, BUT its away from something else. Is it needed? same for the other points. Its bad idea to have features that are non essential as they will compromise other factors.

    Tell us what do you want to do with said boat? Search for SOR on this site. Define the SOR and go from there - forget the existing plans for a second.
     
  12. kerosene
    Joined: Jul 2006
    Posts: 1,285
    Likes: 203, Points: 63, Legacy Rep: 358
    Location: finland

    kerosene Senior Member

    LOR = list or requirements?
    SOR = statement of requirements

    we mean the same thing. Makobuilders be specific in what you want the boat to do.
     
  13. SamSam
    Joined: Feb 2005
    Posts: 3,899
    Likes: 200, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    If it's ''an extremely heavy steel model'' boat, "the extra 20+ tons (over a "normal" heavy displacement cruiser)" doesn't necessarily give you 20+ tons more of capacity. Maybe you only get 5 tons more capacity (or 0 tons extra) and then you have to haul around 15 or 20 extra (useless?) tons of construction, forever.

    I worked at a place that made 30' fiberglass boats. They normally took x amount of glass and 4 barrels of resin to make and were plenty strong for any intended use. An inexperienced laminator came along and made one and the boss went crazy when he saw the invoice for 5 barrels of resin. He thought the guy had stolen it, but the guy had just used too much resin and made a resin rich boat. The boss was still disappointed, because that was a monetary loss 100% out of profit, hence 100% out of his pocket, but what was notable to me was his comment that the new owner might as well have a barrel of resin bolted to the deck because he was going to have to haul that one around forever.
     
  14. Milehog
    Joined: Aug 2006
    Posts: 571
    Likes: 121, Points: 43, Legacy Rep: 215
    Location: NW

    Milehog Clever Quip

    I already did just that. You want to make a trip to save 30% on fuel with a heavier boat that uses 30% more fuel etc. Watermakers are cheap compared to the unnecessary burning of resources you envision.


    It appears you are either foolishly in love with those plans, too cheap to commission or buy proper plans which will save hunderds of thousands of dollars or a dreamer.
     

  15. Westfield 11
    Joined: Apr 2008
    Posts: 215
    Likes: 8, Points: 0, Legacy Rep: 95
    Location: Los Angeles

    Westfield 11 Senior Member

    Used boats are so cheap these days, why would you want to waste money building one? If you want an inappropriate fishboat hull, just buy a used one and modify it.....
     
Loading...
Similar Threads
  1. brendan gardam
    Replies:
    15
    Views:
    2,295
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.