newbie question on wooden boat building

Discussion in 'Boat Design' started by sailmonkey, Sep 20, 2014.

  1. sailmonkey
    Joined: Sep 2014
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Washington State

    sailmonkey Junior Member

    Greetings everyone. So considering a 16 foot by 7 foot utility boat, full displacement hull, what are the pros and cons of cedar plank on steam built oak frame vs strip plank on laminated frame with fiberglass cloth, tape, and epoxy? It would seem that the weight would be similar, the build time similar, and cost of strip with fiberglass and epoxy would be more. We have been brainwashed that we all need to take a statin or we might die next month. What is going on in this case?

    Thank you,

    John
     
  2. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Steam bent frames can be used with strip planking.

    Laminated frames can be used with traditional planking.

    Many glued strip plank boats have minimal framing - typically a few bulkheads/frames.

    If the boat will be kept out of the water, or will be trailered then a strip plank boat will be happier than a traditional carvel plank boat.

    Cost comparison depends on local availability and cost of wood.

    Build time comparison depends on experience and expertise.
     
  3. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Cedar planking over steam bent frames will take maybe half the time of the other method assuming the same amount of framing. However, if you are going to fiberglass the hull, might as well make it frameless.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.