Mini rules revolution?

Discussion in 'Sailboats' started by myszek, Apr 12, 2015.

  1. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Arkema

    No info on the wingsail-sorry.
     
  2. CT249
    Joined: May 2003
    Posts: 1,449
    Likes: 191, Points: 63, Legacy Rep: 215
    Location: Sydney Australia

    CT249 Senior Member

    Won't the use of foils be used to further increase stability (in the same way as the scow shape, wide beam and canting keel were) and therefore increase the loadings and put even more emphasis on a rig that develops extra power? Coupled with the fact that foilers seem to put an even greater emphasis on reducing weight, it sounds like it may be a recipe for greatly increased budgets.

    The skinny Welbourne designed DSS foiler seemed to be a more promising package from the point of view of accessibility and reduced budgets.

    Given the experience of other foilers and classes of similar speed, where high righting moment is crucial, it would appear odd if a canting keel wasn't used. Nor does there seem to be any move in other foilers to reduce mast height.
     
  3. CT249
    Joined: May 2003
    Posts: 1,449
    Likes: 191, Points: 63, Legacy Rep: 215
    Location: Sydney Australia

    CT249 Senior Member

    The inference in the Y&Y piece is that the fact that Beneteau have gone for a foiler means that foiling is now bound for the mainstream. One may point out that the idea that Beneteau's racing boats are a pointer to the future of mainstream sailing was demonstrated to be incorrect by the 30, 30 E, Figaro Solo 1 and others. These boats were all racing "specials" aimed by Beneteau at market sectors that never made it to the mainstream (apart from the 30, which was to a style of design that was soon replaced). Beneteau's success rate at picking new racing concepts that will make it in the mainstream is arguably not particularly high.
     
  4. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Jive plus Rules

    The new Beneteau is not designed to be a "foiler". It's odd foils only develop lateral resistance-not vertical lift. I think that this is their way to attempt to cash in on the foiler craze without actually having a boat that foils-and to avoid paying a royalty to Dynamic Stability Systems.
    From Yachting World:
    "These novel looking foils are designed to replace the traditional weighty ballast tanks used on past Figaro models. Described as ‘asymmetric tip foils’ they work by creating side force to supplement the skinny keel and reduce leeway while causing minimal drag. An important factor is also that they are able to retract within the boat’s maximum beam."

    "The foils are not designed to lift the boat out of the water"

    --
    I think the change in Mini rules is a brilliant update to keep the "Proto" state of the art-it will produce some extraordinary boats.
    I think Hugh Welbourn's first DSS Mini could be interesting but I'm afraid its time is past with the rule change and his new boat, done to the modified rules, is likely to make a much greater impression with the Q23 "Flying DSS" foils :

    [​IMG]
     
  5. Skyak
    Joined: Jul 2012
    Posts: 1,462
    Likes: 145, Points: 63, Legacy Rep: 152
    Location: United States

    Skyak Senior Member

    CT,
    the way I see it, a major mainstream sailboat producer -arguably THE big mainstream sailboat producer is offering a foil assist boat. It's a class of their creation, and it is more about gauging customer experience than making money. Your view that Benetau has a poor record of directing mainstream sailing with these developments is just misinterpretation to support your argument -like pointing to designers of women's shoes and calling them idiots for making shoes that they can't walk in that are priced 100X what a decent shoe costs. Benetau as a corporation needs fast, new interesting boats for marketing and technology. Will it be influential on the future of sailboats? "Maybe" is the answer, and maybe is all it needs to be for their corporate purpose.

    A foil assist boat designed by VPLP will be produced by Benetau -that is a milestone. My view is that it will compare favorably to canting keels and water ballast.

    Doug L. you need to read up on "Design Failure Mode Effects Analysis" and consider the full effect of the foil angles. Having the foil reach over the top, above the water line makes total loss a fail-safe condition. On a healing boat DSS has a negative contribution in the vertical plane -which results in drag.

    Myszek, wings tend to be more significant for their inclusion. Their designs are quite similar. The most significant attribute of Arkema is the composite material being a recyclable thermoplastic. Real success will be demonstrated by the products made when the boat is ground up and molded again.
     
  6. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    =====================================
    "Foil Assist" generally means a foil designed to lift some percentage of the boats weight. The Beny doesn't do this-or very little.

    Most DSS boats are designed to heel to one degree or another. The biggest exception I've seen is CQS designed with a straight foil parallel to the water when the boat is level. However, their foils also have flaps-which is another first for DSS.
     

    Attached Files:

  7. CT249
    Joined: May 2003
    Posts: 1,449
    Likes: 191, Points: 63, Legacy Rep: 215
    Location: Sydney Australia

    CT249 Senior Member

    Skyak, I didn't say that Beneteau are trying to direct mainstream sailing, so please don't say I did. Yes, I understand the reasons behind many of the "racing specials" Beneteau have produced and I have since I first dealt with Beneteau's marketing people in the 1980s.

    None of that does anything to undermine the point that Beneteau's track record indicates that their "racing specials" are often NOT a predictor of the way the mainstream market is going, as the Y&Y article may be seen to imply. As examples, the mainstream sailing world did not turn towards medium/heavy masthead rigged narrow-sterned half tonners after Beneteau produced the "racing special" First 30 at the end of the '70s, nor towards light fractional racing machines after they produced the one and half tonners of '81 and '84. The marinas of the world were not clogged with twin side-by-side cabins after Beneteau did the "racing special" Corum in 1987 (IIRC). Nor did the mainstream sailing world turn towards water ballasted singlehanders after Beneteau produced the Figaro Solo in 1989.

    This is not misinterpreting anything. This is looking at what really happened.

    Given this track record and the fact that that there is no reason to think that Beneteau are trying to "direct mainstream sailing" or even that they are trying to predict its direction, the Y&Y claim therefore appears to be over-shooting the mark.
     
  8. Konstanty
    Joined: Mar 2016
    Posts: 95
    Likes: 4, Points: 8, Legacy Rep: 10
    Location: Bydgoszcz Poland

    Konstanty Junior Member

    How does it fit in the rules of mini 650 transat ?

    How does fit this monohul proa in the rules of mini 650 transat class? That is the question. :?:
     

    Attached Files:

    Last edited: Feb 7, 2017
  9. Konstanty
    Joined: Mar 2016
    Posts: 95
    Likes: 4, Points: 8, Legacy Rep: 10
    Location: Bydgoszcz Poland

    Konstanty Junior Member

    mini650proto.jpg One more
     

    Attached Files:

  10. sharpii2
    Joined: May 2004
    Posts: 2,246
    Likes: 329, Points: 83, Legacy Rep: 611
    Location: Michigan, USA

    sharpii2 Senior Member

    Reading this thread, I have come to a few conclusions.
    1.) that if they want to go to this much beam, they are going to have to include multi hulls, especially if they allow lift foils at the end of cross beams. A DSS system with the same width is likely to impart far less RM for the same drag as lift foils on the end of cross beams. For this reason, it may be easy to argue that a well designed float may be just as effective. And a whole lot cheaper
    2.) A boat with lift foils at the end of cross beams and a narrow scow-like hull may prove superior. The hull can be designed to plane. Such a design could eliminate a vast web of complexity, and need far less control lmput to keep it going.
    3.) As far as I know, Benteau is still in business. Perhaps building just a few of these innovative designs keeps them in the public eye, even though the vast majority of their customers will never buy such boats.
     

  11. Konstanty
    Joined: Mar 2016
    Posts: 95
    Likes: 4, Points: 8, Legacy Rep: 10
    Location: Bydgoszcz Poland

    Konstanty Junior Member

    mini650proto v.2.jpg One more version
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.