cheaper 3m 5200 alternative

Discussion in 'Boatbuilding' started by Tilden, Apr 16, 2013.

  1. Tilden
    Joined: Apr 2013
    Posts: 11
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: socal

    Tilden Junior Member

    Is there a generic cheaper alternative to 3M 5200?
     
  2. michael pierzga
    Joined: Dec 2008
    Posts: 4,862
    Likes: 116, Points: 0, Legacy Rep: 1180
    Location: spain

    michael pierzga Senior Member

    What are you using it for ?

    I use very little 5200 or sika. I prefer to fabricate gaskets for joints and only bed the fastener into 3m.

    The UV resistant Sika or 3m products are reserved for technical work like window bedding , teak decks or underwater skin fittings.

    The advantage of using the Professional products like 3m or Sika is working time...slow or fast dry, viscosity and UV resistance.
     
  3. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    3M 5200 is one of the cheaper adhesive/sealants on the market. The use of these sealants are usually application dependent, so the obvious question is what are you using it for?
     
  4. keith66
    Joined: Sep 2007
    Posts: 346
    Likes: 31, Points: 28, Legacy Rep: 168
    Location: Essex UK

    keith66 Senior Member

    There are numerous alternative Polyurethane sealants on the market, here in the UK we can get versions from car trade suppliers, Other manufacturers include Wurth, & Soudal. Screwfix also sell a generic PU sealant called PU40 and there are others. All are cheaper than Sikaflex. Depends what you want to use it for though.
    One of the cheapies i used in a non critical application was actually melted by antifouling, Not going to use that stuff again!
    As for windows i would never use polyurethane, if you ever need to take the window out to reseal you will wish you used Butyl rubber!
     
  5. Petros
    Joined: Oct 2007
    Posts: 2,934
    Likes: 148, Points: 63, Legacy Rep: 1593
    Location: Arlington, WA-USA

    Petros Senior Member

    All of the replys above are good advise. If you are using it in non-critical applications you can go to a Home Depot or Lowes and look at the adhesive/sealants they sell, read the labels and buy a few and try then out. Many will be suitable alternatives for various applications. Be aware that how well they perform is application dependent. And I would not use cheaper alternatives in risky locations, unless you are willing to live with the consequences.
     
  6. viking north
    Joined: Dec 2010
    Posts: 1,868
    Likes: 94, Points: 48, Legacy Rep: 1146
    Location: Newfoundland & Nova Scotia

    viking north VINLAND

    I havent tried it for marine applications yet but Quad Four does one heck of a good job on vinyl window installs and is just a pleasure to apply. If I were stuck or money was tight I wouldn't have a problem giving it a go for general use on my own boat. Around $6.00 a tube.
     
  7. FMS
    Joined: Jul 2011
    Posts: 611
    Likes: 22, Points: 18, Legacy Rep: 227
    Location: united states

    FMS Senior Member

    For use in any critical below-the-waterline area, consistency and quality are worth paying $12 per cartridge for the standard 5200. These 10 oz cartridges are the best value. The 5 gallon pails are impractical to use for anyone outside a boatbuilding factory.
     

  8. Pylasteki
    Joined: Apr 2008
    Posts: 74
    Likes: 3, Points: 8, Legacy Rep: 42
    Location: North Carolina

    Pylasteki Junior Member

    Grab a tube of Bostic #920 its around 8 bucks a tube. Try it to see if it is suitable for the purpose you are after. It is white, formulated for marine applications above or below the waterlines and is more sealant than adhesive, though still plenty adhesive. If you don't cut it loose it will tear epoxy fiberglass off plywood, so be warned if you are going to put it somewhere you imagine treading in the future...

    It is what a lot of wooden boat yards are using between the planks on wood boats and as a general bonding goop to put things together. Normally it will rip wood to wood joints apart in demolition mode, I say normally... as its not guaranteed like 5200. I don't know anyone that would bed in a shaft strut with it, if that puts in perspective its place in the hierarchy of boat goop. It doesn't like sunlight all that much either, so don't bed in your window frames with it...

    It doesn't really take paint and isn't really sandable. It can be sanded, and can be painted but its not overly easy. It also has an odd habit of staying a bit sticky if applied in the dead of winter, and extruding back out of seams when it finishes curing.

    You know the drill, there is the right product for the job... and then there are others that will work, with some compromises you can save a buck or two, but its up to you to decide if its worth your time to save a buck or two. After a couple years of messing with the stuff I switched over to 5200 for the shop favorite... it only takes one or two tubes of 920 going hard in the case to make it a wash as far as price goes.
     
Loading...
Similar Threads
  1. ecflyer
    Replies:
    15
    Views:
    26,720
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.