boat building method

Which one is the easiest and newest method for boat building? and whicp plan supplier provide like that plan?

 

The newest proven method over a long history of boatbuilding would probably be stitch and glue frameless (or mostly frameless) construction, using plywood and epoxy and fiberglass cloth. There are certain to be some newer methods but you need not concern yourself with those if you are looking at starting a first-time project.

 

stitch & glue glass over plywood construction

www.bateau.com

There's been a few of their TW28 designs built in Turkey in the last couple of years. Check out this thread....

http://forums.bateau2.com/viewtopic.php?t=9494

and this one....

http://forums.bateau2.com/viewtopic.php?t=16562&highlight=yavuz

 

okey my friend I know bateau I know all boats of them is there different companies?

 

What are you going to build, sail,motor, and on which scale? Homebuild? Boatshop?
Are you in Istanbul / Tuzla ?

 

no I am from İzmir. for homebuild, I have a website which is about boat building materials. I looking for everything about boat building.

 

I understand, but no, for homebuilders I do´nt know any new methods.

 

thank you my friend . I am looking for new methods. easiest ones maybe I can find in this time

 

http://www.glen-l.com/

 

Designers and engineers are always coming up with subtle changes to current methods and applications. I don't personally believe that taped seam (stitch and glue) is the easiest method for the novice or beginner. This of course is a well debated opinion, but after years of designing boats for home builders, the biggest issues I've found are "goo factor" related among the first time builders. The goo factor (my term for lots of messy adhesive and sheathing effort) is quite high on these methods, which isn't user friendly for a person with little experience.

I think glue and screw is much more user friendly for the novice builder and usually far cheaper too. These methods are a cross between taped seam and traditional plywood over frame construction. Generally the seams aren't taped, but screwed to battens with a bed of adhesive or sealant. There's typically more framing involved, but these wood working skills are more commonly found in the novice builder.

Can you list your web site address?

 

I agree with PAR. While stitch and glue is newer as a construction technique, older methoods such as plywood on frame (chine logs, etc.), or even solid wood (as in typical traditional skiff design) are much better suited to the novice.
There are enough miracle adhesives out there to assist in sealing seams and joints that it's not hard to get a really water-tight hull nowadays.
You can progress towards epoxy joints later. Meanwhile, there are many uses for limited experience with epoxy and additives in even traditional construction.
Luckily, there are thousands of wooden boat designs with plans that don't require huge amounts of epoxy--- some can be taped with fiberglass just at the seams (tack and tape), and those do not depend on epoxy for strength, just for waterproofing.

 

Here is my adress : www.kenditekneniyap.com

 

What did you expect I dont know but first you have look very careful. Plans under affillate program. bateau company and joel knows this. I am waiting for your apologize.

 

Joel is a friend of mine, I'll call him this afternoon and find out the real story.

 

you can call where do you want to call. Just look for satın al link from my site it is going to bateau's page. I think you dont understand.