Auto Ship Tutorial Video...Enjoy

Discussion in 'Software' started by tahtoh25, Jul 15, 2013.

  1. tahtoh25
    Joined: Oct 2010
    Posts: 22
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Alexandria -Egypt

    tahtoh25 Junior Member

  2. justkho78
    Joined: Dec 2013
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Singapore

    justkho78 New Member

    Hi, can we convert the model to CMD file if you import the model from dxf file in model maker? Thanks in advance.
     
  3. tahtoh25
    Joined: Oct 2010
    Posts: 22
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Alexandria -Egypt

    tahtoh25 Junior Member

    Actually what i know that you can't import the dxf file into model maker only in autoship or autoyacht
     
  4. athvas
    Joined: Feb 2013
    Posts: 156
    Likes: 1, Points: 0, Legacy Rep: 16
    Location: india

    athvas Senior Member

    we can import dxf body plan into autoship (modelmaker) to get GF file.
     
  5. tahtoh25
    Joined: Oct 2010
    Posts: 22
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Alexandria -Egypt

    tahtoh25 Junior Member

    may be from autoship you can import dxf file then you modify it and then insert it to autohydro.....but not direct from model maker
     
  6. athvas
    Joined: Feb 2013
    Posts: 156
    Likes: 1, Points: 0, Legacy Rep: 16
    Location: india

    athvas Senior Member

    i can't understand what your are saying..... once you get gf file in modelmaker you can use it in autohydro....
     

  7. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    tahtoh25, I saw your video with interest and I have to say that, the video, is a big job that can help people.
    I would like to comment on one aspect rather than the video itself but something that I gather from it: the curve of righting levers, which appears at one point, suggests that the ship has an initial GMt very small, which is not possible given boat forms. Is there something wrong when calculating this curve, or I'm wrong in my deduction?.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.